Impex COMPETITOR CB-280 Owner's Manual page 7

STEP 3 (See Diagram 3)
A.) Attach the Leg Developer (#6) to the Front Support (#5). Secure it with one M10 x 2
3/8" Hex Bolt (#21), two Ø ¾" Washers (#31), and one M10 Aircraft Nut (#27). Do not
over tighten the Bolt. Make sure the Leg Developer is able to swivel.
B.) Insert two Foam Tubes (#13) halfway through the holes on the Leg Developer. Push
four Foam Rolls (#12) onto the Tubes from both sides.
C.) Place a Spring Clip (#39) onto the weight post on the Leg Developer.
6
DIAGRAM 3