Impex COMPETITOR CB-280 Owner's Manual page 8

STEP 4 (See Diagram 4)
A.) Attach the hole-side of the Backrest Supports (#7) onto both ends of the pivot on the Main
Seat Support (#3). Place the other end rest against the Backrest Adjustment Bar (#11).
B.) Place the Backrest Board (#8) onto the Backrest Supports. Secure it with four M6 x 1 5/8"
Hex Bolts (#23) and Ø ½" Washers (#25).
C.) Place the Seat Pad (#9) onto the Main Seat Support. Secure it with four M6 x 5/8" Hex
Bolts (#22) and Ø ½" Washers (#25).
7
DIAGRAM 4