Moffat Washing machine Instructions For Use Manual page 16

Start the operation
16
- Adding washing and softening agents
(see Tips for washing and energy saving)
•
pre-wash compartment
•
main wash compartment
•
softener compartment
Washing detergent may be added directly into the
drum, using the measuring vessel.
When adding softener, be careful to fi ll the
dispenser only up to the marked level.
Be sure to close the detergent dispenser
when opening/closing the appliance door.
•
Push the START button (C). The ON/OFF LED
stops fl ashing, the machine starts operating after
a few seconds. If the door is not properly closed
after starting the operation, the ON/OFF LED
starts fl ashing again after a few seconds. When
you close the door, the machine initiates the
selected program.
•
In case you would like to alter the washing
program after the initiated washing operation,
turn the program selector for one second to the
position "0", followed by the selection of a new
program. Switching the machine off deletes any
previously selected additional functions (i.e.
RINSE HOLD)
If a power failure occurs during the
washing program, when the power is
restored the machine will resume the
execution of a program where it had been
interrupted.
, so they have to be reactivated.