Selection Of Basic Programs - Moffat Washing machine Instructions For Use Manual

Washing machine
operation
- Open the door of the machine.
Door is opened by pulling the handle (lever) on
the right hand side of the door towards you.
- Sort the laundry by the type of fabrics.
Do the buttons and zippers, tie the strings
and pull out the pockets.
Very delicate laundry should be put in a
special protective sack.
It is suggested to load the drum with items
of different sizes.
Pay attention to the labels on the clothes,
indicating the recommending washing mode
(see table of textile treatment symbols on the
last page of these instructions).
- Load the laundry into the drum.
Check that the drum is empty.
- Close the door of the appliance.
- Open the water inlet faucet.
- Push the ON/OFF button and select washing
program.
Program is selected by turning the program selector (A)
from the "0" position to the desired washing program.
The ON/OFF signal LED starts fl ashing. The program
selector (A) may be turned in both directions, and the
appropriate program selected according to the type of
laundry washed and the required washing temperature
(see Program Chart for help). You may select basic or
partial programs.
Selected program may be changed at random prior
pushing the START button (C).

- Selection of basic programs

Selection of basic programs ( ,
Basic programs represent integral programs containing
all washing stages, including softening and spinning
(see Program Chart). They are selected by turning the
program selector to the appropriate position.
, , )
13