Moffat Washing machine Instructions For Use Manual page 10

Water outlet connection
Connect the appliance
to the mains supply
10
•
Fix the outlet hose to run into the sink or the
bathtub, or connect it directly to the wall drain
outlet (diameter min. 1,6 inch - 4 cm).
•
Wall drain must be installed properly and must
enable occasional cleaning.
•
Fasten the outlet hose support with a piece of
rope led through the hose elbow, to prevent the
hose from slipping to the fl oor.
The end of outlet hose should be placed between
minimum 24 inch (60 cm) and maximum 40 inch
(100 cm) above the fl oor level.
•
Plug the main power cable to the wall main
socket.
•
Required voltage and other information are written
on the rating plate above the door opening of the
machine.
The wall socket must be accessible at all
times and must be equipped with a ground
lead (in accordance with the local safety
regulations).
The permanent connection must be fi tted
by an authorized personnel only.
Damaged main power cable may be
replaced only by the manufacturer or
authorized servicer.
Never plug the appliance into the electric
shaver socket or hair dryer socket.
Connect to individual branch circuit.