1. Manuals
  2. Brands
  3. Savoy Manuals
  4. Fan
  5. ACROPOLIS
  6. Owner's manual

Savoy ACROPOLIS Owner's Manual

Ceiling fan
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

CEILING FAN

OWNER'S MANUAL
READ AND SAVE THESE INSTRUCTIONS
MODEL: ACROPOLIS
FAN RATING AC 120V. 60Hz
CUL LISTED MODEL : AC-552OD

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ACROPOLIS and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Savoy ACROPOLIS

Summary of Contents for Savoy ACROPOLIS

  • Page 1: Ceiling Fan

    CEILING FAN OWNER'S MANUAL READ AND SAVE THESE INSTRUCTIONS MODEL: ACROPOLIS FAN RATING AC 120V. 60Hz CUL LISTED MODEL : AC-552OD...

  • Page 2: Tools And Materials Required

    1. TOOLS AND MATERIALS REQUIRED Philips screw driver Blade screw driver 11 mm wrench Step ladder Wire cutters 2. PACKAGE CONTENTS Unpack your fan and check the contents. You should have the following items; a. Blade set (5) b. Hanger bracket assembly c.

  • Page 3: Safety Rules

    3. SAFETY RULES 1. To reduce the risk of electric shock, insure 9. To avoid personal injury or damage to the electricity has been turned off at the fan and other items, be cautious when circuit breaker or fuse box before working around or cleaning the fan.

  • Page 4: Mounting Options

    4. MOUNTING OPTIONS If there isn't an existing CUL listed mounting box, then read the following instructions. Disconnect the power by removing fuses or turning off circuit breakers. Secure the outlet box directly to the Outlet box building structure. Use appropriate fasteners and building materials.

  • Page 5: Hanging The Fan

    5. Hanging the Fan Hanger bracket REMEMBER to turn off the power. Follow the steps below to hang your fan properly: Ceiling Step 1. Remove the decorative canopy canopy bottom cover from the canopy by turning the cover counter clockwise. (Fig. 5) Canopy Step 2.

  • Page 6: Installation Of Safety Support

    6. INSTALLATION OF SAFETY SUPPORT An additional safety support is provided to Hanger bracket Safety cable prevent the fan from falling. Secure the safety cable to the ceiling joist with screw and washer, as illustrated in Figure 9. Figure 9 7.

  • Page 7: Finishing The Installation

    Step 3. (Figure 12) Receiver to House Supply Wires Electrical Connections: Outlet box Connect the black (hot) wire from the ceiling to the black wire marked "AC in L" White (neutral) Black (hot) f r o m t h e r e c e i v e r . C o n n e c t t h e Green or bare white(neutral) wire from the ceiling to the copper (ground)

  • Page 8: Attaching The Fan Blades

    9. ATTACHING THE FAN BLADES Caution: Remove the screws from the motor support plate, discard the screws and motor support plate. Step 1 Attach the blade to the blade bracket using the screws and rubber Screws washers as shown in Figure 14. Start Rubber screw into bracket.

  • Page 9: Installing The Light Kit

    11. INSTALLING THE LIGHT KIT N O T E : B e f o r e s t a r t i n g i n s t a l l a t i o n , d i s c o n n e c t t h e p o w e r b y t u r n i n g o f f the circuit breaker or removing the fuse at fuse box.
  • Page 10 13. OPERATING INSTRUCTIONS Restore power to ceiling fan and test for proper operation. A. HI, MED, and LOW buttons: These three buttons are used to set the fan speed as follows: HI= high speed Med= medium speed Low= low speed B.

  • Page 11: Installing The Battery

    14. INSTALLING THE BATTERY Install 9 volt battery (included), to prevent damage to transmitter, remove the battery if not used for long periods. (Fig. Figure 21 15. TROUBLESHOOTING Problem Solution Fan will not start. 1. Check circuit fuses or breakers. 2.

Table of Contents