Fader Control; Beep Control - Hyundai MP3-01 Instruction Manual

The display will automatically return to the normal indication in 5 seconds
after the last adjustment or when another function is activated.
@ - (5) FADER CONTROL
To adjust the front-rear speaker balance, first select the Fader mode by
pressing the Select button iZ-l until the
"FADER"
indication appears on
t l r o , l i c n l l r n : n o l
Within 5 seconds of choosing the Fader mode, turn right/left to adjust
the front-rear speaker level as desired.
The fader posiiion wilI be shown by the bars on the display panel from
'FADER
10F' (tull front) to
"FADER
10R"(tull rear). When the volume
level betr,veen the front and rear speaker is equal,
"FADER
F=R" will be
shown on the display panel. The display will automatically return to the
normal indication in 5 seconds after the last adiustment or when another
function is activated.
@- (6) BEEP CONTROL
To adjust the Beep mode, first select the Beep mode by pressing the Select button (D until
"BEEP"
indication appears on
the display panel.
The Beep mode will be shown on the display panel from
"BEEP
2ND",
"BEEP
OFF"and
'BEEP
ON". The dispiay will
automaticallv return to the normal indication in 5 seconds after the last adiustment or when another function is
activated.
Select
"BEEP
ON" when you wish to hear the
"BEEP"
sound whenever any function button is pressed.
Select
"BEEP
2ND" when you wish to hear the
"BEEP"
sound whenever any Tuner Pre-set button and/or Tune Seek
buttons are pressed for moie than .l seconds.
aZ)