Advertisement
o- (5)FADER CONTROL
To adjust the front-rear speaker balance, first select the Fader mode by
pressing the Sound button (D until the
"FADER"
indication appears on the
display panel.
Within 5 seconds of choosing the Fader mode, turn right/left
to adjust the
front- rear speaker level as desired.
The fader position will be shown by the bars on the display panel from
"FADER
10F" (full front) to
"FADER
10R"(full rear). When the volume
level between the front and rear speaker is equal,
"FADER
F= R" will be
shown on the display panel. The display will automatically
return to the
normal indication in 5 seconds after the last adjustment or when another
function is activated.
e)
2 - (6) BEEP CONTROL
To adjust the Beep mode, first select the Beep mode by pressing the Sound button O until "BEEP" indication appears on the
display panel. The Beep mode will be shown on the display panel from
"BEEP
2ND",
"BEEP
OFF" and
"BEEP
ON". The
display will automatically return to the normal indication in 5 seconds after the last adjustment or when another function is
activated. Select
"BEEP
ON" when you wish to hear the
"BEEP"
sound whenever any function button is pressed.
Select
"BEEP
2ND" when you wish to hear the "BEEP" sound whenever any Tuner Pre-set button and/or Tune Seek buttons
are pressed for more than 3 seconds.
Advertisement
