Table of Contents
Advertisement
B
45 00
B
47 00
B
47 01
B
47 03
B
48 00
B
48 80
B
49 00
B
4A 00
B
4B 00
4
4C 00
4
4C 80
4
4C 81
4
4C 82
4
4C 83
4
4C 84
B
4E 00
5
55 04
1
5B 00
6 SENSE DATA
Select/Reselect
Failed
SCSI Parity Error
Data Phase CRC
Error Detected
Information Unit
CRC Error Detected
Initiator Detected
Error Message
Received
SCSI Phase Retry
Out
Invalid Message
Error
Command Phase
Error
Data Phase Error
Logical Unit Failed
Self-configuration
Ram Configuration
Load Error
Program Revision
Check Error
Module Not Found
Module Sum Error
Defect Parameter
Load Error
Overlapped
Commands
Attempted
Insufficient
Registration
Resources
Log Exception
A Select/Reselect time out was occurred.
An invalid selection was detected.
A parity error occurred on the SCSI
interface.
A CRC error occurred in Data Phase.
A CRC error occurred in Information Unit.
An Initiator Detected Error message was
received from an initiator.
A SCSI phase retry out was occurred.
An invalid message was received.
An error occurred in Command Phase.
An error occurred in Data Phase.
A loading of microcode or parameters failed
during controller initialization.
Failed to configuration load for ram
initializing.
Failed to download micro program for
program revision check .
Failed to download micro program for
program size.
SUM check error was detected in program
down loading.
A loading of defect parameter failed during
controller initialization
Both tagged command and untagged
command from the same initiator are issued
at a same time.
- A tagged command which specifies the
same tag number is issued from the same
initiator.
- An untagged command is issued from the
same initiator which has issued another
untagged command.
The reservation key registration failed.
The Log exception was detected.
OEM MANUAL:K6602594
Revision: 1 / Date: 2003.03.06
Page: 269 / 273
Advertisement
Table of Contents
