Table of Contents
Advertisement
1
31 F0
1
31 F1
4
32 00
3
32 01
1
37 00
5
3D 00
2
3E 00
4
3E 03
4
3E 04
6
3F 00
6
3F 01
6
3F 02
6
3F 03
4
40 00
4
42 00
4
42 80
6 SENSE DATA
ETF Cylinder Read
Error
ETF Cylinder ESDI
Defect List Check
Error
No Defect Spare
Location Available
Defect List Update
Failure
Rounded Parameter A parameter value received was not useable
Invalid Bits in
Identify Message
Logical Unit Has
Not Self-configured
Yet
Logical Unit Failed
Self-Test
Logical Unit Unable
to Update Self-Test
Log
Target Operating
Conditions Have
Changed
Microcode Has
Been Changed
Changed Operating
Definition
Inquiry Data Has
Changed
RAM Failure
Power On or Self-
test Failure
Hard Register Error
at Send Diag Self
Test
The controller detected read error during
reading ETF in initial format and judged
there was no P-list.
The controller detected ESDI defect list
check error during initial format and judged
there was no P-list.
Due to short alternate spares, reassigning
blocks could not be processed.
An updating the Grown (G) list failed.
as it was, so it was rounded by the controller.
The invalid bits were detected in Identify
message.
The Self-configuration of Logical Unit has
not finished yet.
Failed to Self-Test.
Unable to update the Self-Test log.
The operating conditions of target have
changed.
A micro code has been changed.
An operating definition has been changed.
A Inquiry data has changed.
Failure of RAM memory.
A power-on diagnostic error occurred.
*
MPU Error
*
TIMER Error
*
ROM Error
*
Disk Controller Error
*
ESDI H/W Error
*
RAM Diagnostic Error
*
Buffer Diagnostic Error
Hard register diagnostic error was detected
at Send Diag Self Test.
OEM MANUAL:K6602594
Revision: 1 / Date: 2003.03.06
Page: 265 / 273
Advertisement
Table of Contents
