Table of Contents
Advertisement
1
17 06
1
17 07
1
17 09
1
17 86
1
18 00
1
18 01
1
18 02
1
18 05
1
18 07
1
18 82
1 or 3
19 00
1 or 3
19 01
1 or 3
19 02
6 SENSE DATA
Recovered Data
without ECC - Data
Auto-Reallocated
Recovered Data
without ECC -
Recommend
Reassignment
Recovered Data
without ECC-
Data Rewritten
Recovered Data
without ECC - Data
Auto-Reallocated,
Relocation
Threshold-Over
Recovered Data
with Error
Correction Applied
Recovered Data
with Error
Correction &
Retries Applied
Recovered Data -
Data Auto-
Reallocated
Recovered Data-
Recommend
Reassignment
Recovered Data
with ECC-Data
Rewritten
Recovered Data -
Data Auto-
Reallocated,
Relocation
Threshold-Over
Defect List error
Defect List Error
Not Available
Defect List Error in
Primary List
An error has been recovered by retries
(without ECC) and a sector has been
reallocated. Auto-Reallocation process was
performed.
The error has been recovered without ECC
correction. A reassignment is
recommended.
The error has been recovered without ECC
correction and data rewritten.
Data error has been recovered by ECC
correction and a sector has been reallocated.
Auto-Reallocation process was performed
but a relocation count was over its threshold
value.
Data error has been recovered by ECC
correction. (without retries)
Data error has been recovered by ECC
correction and retries.
Data error has been recovered by ECC
correction (retries may or may not be done)
and a sector has been reallocated. Auto-
Reallocation process was performed.
Data error has been recovered by ECC
correction. A reassignment is
recommended.
Data error has been recovered by ECC
correction and data rewritten.
Data error has been recovered by ECC
correction and a sector has been reallocated.
Auto-Reallocation process was performed
but a relocation count was over its threshold
value.
Error exists in defect list.
Defect list could not be used.
An error occurred during an access to the
Primary (P) list
OEM MANUAL:K6602594
Revision: 1 / Date: 2003.03.06
Page: 262 / 273
Advertisement
Table of Contents
