Table of Contents
Advertisement
11
• Fit the motor harness into the groove in the vehicle
floorboard, as shown.
12
Seat
• Place the seat onto the vehicle floorboard, as shown.
• Insert two #8 x
3
/
" screws through the seat and into
4
the floorboard.
• Tighten the screws with a Phillips screwdriver. Do not
over-tighten.
Assembly
Motor
Harness
Groove
Groove
13
• Turn the vehicle over so that the bottom is facing up.
• Insert two #8 x
3
/
" screws through the slots in the
4
vehicle bottom and into the seat.
• Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
12
Slots
Advertisement
Table of Contents
