Table of Contents
Advertisement
• Please read this manual and
• Please read this manual and
save it with your original
save it with your original
sales receipt.
sales receipt.
• Tools needed for assembly:
• Tools needed for assembly:
two assembly wrenches
two assembly wrenches
(included) and a Phillips
(included) and a Phillips
Screwdriver (not included).
Screwdriver (not included).
• Use only with a Power Wheels
• Use only with a Power Wheels
12 Volt Lead-Acid Rechargeable
12 Volt Lead-Acid Rechargeable
Battery and a Power Wheels
Battery and a Power Wheels
12 Volt Charger (both included).
12 Volt Charger (both included).
Owner's Manual
Owner's Manual
with Assembly Instructions
with Assembly Instructions
For Models P9723, T4872,
For Models P9723, T4872,
and T3310
and T3310
® ®
® ®
Advertisement
Table of Contents
Related Manuals for Power Wheels Kawasaki KFX P9723
Summary of Contents for Power Wheels Kawasaki KFX P9723
- Page 1 • Please read this manual and • Please read this manual and save it with your original save it with your original sales receipt. sales receipt. • Tools needed for assembly: • Tools needed for assembly: two assembly wrenches two assembly wrenches (included) and a Phillips (included) and a Phillips Screwdriver (not included).
-
Page 2: Table Of Contents
TABLE OF CONTENTS Important Information ..................2 Warnings and Cautions. -
Page 3: Warnings And Cautions
ELECTRICAL HAZARD • To prevent electric shock, do not immerse in water; wipe clean with a damp cloth. • Battery can fall out and injure a child if vehicle tips over. Always use battery retainer. • PREVENT FIRE - Never modify the electrical system. Alterations could cause a fi re resulting in serious injury and could also ruin the electrical system. -
Page 4: Parts
• If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751, rather than return this product to the store. • Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded. - Page 5 Rear Axle 4 Hubcaps 4 Wheel Covers Part Not Shown: Label Sheet #8 x " Screw - 4 #8 x 2" Screw - 2 For your convenience, we included extra fasteners! Note: Tighten and loosen all screws with a Phillips screwdriver. Do not over-tighten the screws. 12 Volt Battery 2 Bushings 2 Hand Grips...
-
Page 6: Parts Picture
Note: Some parts shown are assembled on both sides of the vehicle. Vehicle Rear Wheel - 2 Handlebar Wheel Cover - 4 Seat " Washer - 2 12 Volt Battery " -16 Hex Nut - 3 Rear Axle Hubcap - 4 Rear Wheel Driver - 2 12 Volt Battery Charger PARTS PICTURE... -
Page 7: Battery Charging
BATTERY CHARGING ELECTRICAL HAZARD WARNING • Battery can fall out and injure a child if vehicle tips over. Always use battery retainer. • PREVENT FIRE - Never modify the electrical system. Alterations could cause a fi re resulting in serious injury and could also ruin the electrical system. -
Page 8: Assembly
Battery Charger Connector • Plug the charger connector into the battery • Plug the charger into a standard wall outlet Notes: - Use the charger only in a wall outlet. Do not plug the AC adaptor into a ceiling outlet. - If power flow to the wall outlet is controlled by a switch, make sure the switch is “ON”. - Page 9 Motor Assembly Rear Axle Assembly BOTTOM VIEW • Position the vehicle upside down. • Slide the rear axle assembly through the hole in the back end of the vehicle, as shown. Make sure the rear wheel driver fits into the pins in the motor assembly inside the vehicle. Motor Assembly Rear Wheel Driver Wheel Cover...
- Page 10 Steering Column BOTTOM VIEW • Lift the front end of the vehicle up slightly. Check to be sure the steering column fits through the hole in the steering linkage. Lower the front end of the vehicle. Steering Column Cap • While holding the handlebar in place, carefully turn the vehicle over.
- Page 11 SIDE VIEW • Fit a " -16 hex nut onto each end of the front axle. Tighten both hex nuts with the wrench. Hubcaps BOTTOM VIEW • “Snap” a hubcap onto the center of each wheel cover. • Turn the vehicle upright. Wrench "...
- Page 12 • Insert two #8 x 2" screws into the upper holes in the brush guard and tighten. Hand Grip BACK VIEW • Fit both hand grips on the ends of the handlebar. Hint: If it is difficult to slide a hand grip onto the handlebar, moisten the inside of the grip with water.
-
Page 13: Decoration
• Before applying the labels, wipe the surface of the vehicle with a clean, dry cloth to remove any dust or oils. • Place the labels exactly as shown in the illustrations. For best results, avoid repositioning a label once it has been applied to the vehicle. •... - Page 14 RIGHT SIDE VIEW LEFT SIDE VIEW P9723b-0920...
-
Page 15: Battery Installation
BATTERY INSTALLATION IMPORTANT! Use only a Power Wheels 12 volt lead-acid ® rechargeable battery. Use of any other battery will damage your vehicle. Make sure that you charge the battery for at least 18 hours using the enclosed Power Wheels ®... -
Page 16: Battery Care And Disposal
BATTERY CARE AND DISPOSAL Care If a battery leak develops, avoid contact with the leaking acid and place the damaged battery in a plastic bag. See information below for proper disposal. If acid comes in contact with skin or eyes, flush with cool water for at least 15 minutes and call a physician. -
Page 17: Safe Driving Rules
SAFE DRIVING RULES RIDING HAZARD WARNING • Prevent Injuries and Deaths • Direct Adult Supervision Required. • Never Ride at Night. • Keep Children Within Safe Riding Areas. Riding areas must be: - Away from swimming pools and other bodies of water to prevent drownings - Generally level to prevent tip overs - Away from steps, steep inclines, cars, roads and alleys. -
Page 18: Vehicle Operation
VEHICLE OPERATION As assembled, your vehicle is ready to roll in low speed (2½ mph, maximum). It has been pre-set so it will only operate in low speed. After your child has mastered the basic skills of driving and understands the rules for safe driving, it’s time to connect the high speed connectors to allow the vehicle to operate in high speed. -
Page 19: Vehicle Care
• Check all screws, cap nuts and their protective coverings regularly and tighten as required. Check plastic parts on a regular basis for cracks or broken pieces. • During snowy or rainy weather, the vehicle should be stored inside or under a protective cover. Remember to charge the battery at least once per month while your vehicle is not in regular use. -
Page 20: Problems And Solutions Guide
PROBLEMS AND SOLUTIONS IMPORTANT! If you experience a problem with your vehicle, first check the Problems and Solutions Guide below. If you still experience a problem, please contact Power Wheels ® Consumer Relations, toll-free at 1-800-348-0751. Or, contact your local Power Wheels authorized service center. - Page 21 PROBLEM POSSIBLE CAUSE Short run time (Less than Undercharged battery 1 - 3 hours per charge) Overcharged battery Battery is old and will not accept full charge Tripped thermal fuse Vehicle runs sluggishly Undercharged battery Battery needs charging Battery is old and will not accept full charge Vehicle is overloaded Driving conditions are too stressful...
- Page 22 PROBLEM POSSIBLE CAUSE Vehicle runs in low speed, but High speed hook-up not disconnected. does not run in high speed. Please note: The vehicle is designed to operate in low speed only in reverse. When the foot pedal is pressed Operation of vehicle in low speed one rear wheel spins Sometimes the vehicle doesn’t...
-
Page 23: Limited Warranty
LIMITED WARRANTY Bumper-to-Bumper* Limited Warranty One year limited warranty from the date of purchase on the Power Wheels ® vehicle. Six month limited warranty on the 12 volt battery. For the original purchaser, this one year limited warranty covers the Power Wheels ®... - Page 24 Authorized Service Center. For the location nearest you, visit us on-line at www.powerwheels.com. Kawasaki Trademarks used under license to Fisher-Price, Inc. Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, New York 14052 U.S.A. ©2009 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. unless otherwise indicated.