Content Graphics 2 Introduction 5 Package contents 5 Installation environment 5 Camera dimensions 5 Setting up the camera 6 Connecting the devices 7 Accessing the camera over the internet 7 Overview of the camera Web browser 8 Network and streaming configuration 9 Specifications 11 Quick Start Guide 1 EN...
Introduction This pocket guide provides basic information on installing the TruVision IP cam open-standard cameras. For detailed information on installing and using the cameras, please refer to the user manual. Package contents The camera is shipped with the following items: ...
2. Camera. 3. C-mount adaptor (for C-mount lenses only). 4. Lens (auto iris lens shown. A manual iris has no cable.)Not included. 5. Auto iris lens cable. Not included. 6. Auto iris lens connector. Video-type auto iris lens connection: A. Power; B. NC (no connection); C. GND; D. Video DC-type auto iris lens connection: A.
). The card is not supplied with the camera. Video and log files stored on the SDHC card can only be accessed via the Web browser. You cannot access the card using TruVision Navigator or a recording device. Quick Start Guide...
Accessing the camera over the internet Use the camera Web browser to access and configure the camera over the internet. Only one camera is accessible from a single Web browser window. To access the camera online: 1. In the Web browser enter the camera’s IP address (default is 192.168.1.70).
Item Name Description Start/stop live view Click to start/stop live view. Capture Click to take a snapshot of the video. The snapshot will be saved to the default folder in jpeg format. Start/stop Click to record live video. recording Video image Click to adjust video image settings settings such as brightness, contrast,...
Page 12
Table 1: Overview of the configuration parameters Configuration folders Description Local configuration Defines the network type, display mode and local storage paths. Basic information Defines the camera name and RS-485 bus ID. This screen also displays the MAC address, device type, device SN and the current firmware version.