Control Panel - CDA FF880 Manual For Installation, Use And Maintenance

Control Panel

A On/Off key
B Increase temperature key
C Decrease temperature key
D Quick freeze function key
E Quick freeze indicator
fig. 1
Switching the freezer on and off
To switch on the freezer for the first time, press and hold the On/Off key (A) for three seconds. The freezer will beep twice, and
will run at the factory preset temperature of -18°. To switch the freezer off, press and hold the On/Off key for three seconds.
Setting the temperature
Press the increase or decrease temperature keys (B & C) to select the required temperature between -16° and -24°. Once the
required temperature is shown on the display, the temperature will set after five seconds' delay and the freezer will beep twice to
confirm the setting.
The freezer will take some time to adjust to the new settings. This will depend on the difference between the old and new
settings, the ambient temperature, the amount of food in the freezer and the number of times the door is opened.
Over temperature alarm
The freezer is equipped with an over temperature alarm to warn when the termperature in the freezer has been over -8° for
six hours or more. The fridge will beep ten times every thirty minutes until the freezer temperature is below -12°, and the fault
code E9 will show on the display. Press any key to switch the alarm off. E9 will continue to show on the display until the fault is
resolved.
4
D
A
E
B
C