CDA FW881 Instructions For Installation, Use And Maintenance Manual
  1. Manuals
  2. Brands
  3. CDA Manuals
  4. Freezer
  5. FW881
  6. Instructions for installation, use and maintenance manual

CDA FW881 Instructions For Installation, Use And Maintenance Manual

Integrated freezer
Hide thumbs Also See for FW881:

Advertisement

Table of Contents

1
FW881
Integrated freezer
Installation, use and maintenance
www.cda.co.uk

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FW881 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for CDA FW881

Summary of Contents for CDA FW881

  • Page 1 FW881 Integrated freezer Installation, use and maintenance www.cda.co.uk...
  • Page 2 Appliance information: Please enter the details on the appliance rating plate below for reference, to assist CDA Customer Care in the event of a fault with your appliance and to register your appliance for guarantee purposes. Appliance Model...
  • Page 3 This appliance has been manufactured to the strictest standards and complies with all applicable legislation, including Electrical safety (LVD) and Electromagnetic interference compatibility (EMC). Parts intended to come into contact with food conform to 1934/2004/EC. IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2012/19/EU.
  • Page 4 Unpacking During transportation, protective packaging was used to protect the appliance against any damage. After unpacking, please dispose of all elements of packaging in a way that will not cause damage to the environment. All materials used for packaging the appliance are environmentally friendly;...
  • Page 5 • The Manufacturer shall not be held liable for damage arising from the failure to observe the instructions contained in this manual. • Keep this manual for future reference, or to pass it over to the next user. • This appliance is not intended for use by persons (including children) with limited physical or mental capabilities and persons who lack experience or familiarity with the appliance.
  • Page 6 • Air the room in which the appliance is placed for a few minutes (the size of the room for a product containing isobuthane/R600a must be at least 4m ) to avoid damage to the cooling system. • Do not refreeze partly thawed products. •...
  • Page 7 • Cleaning and maintenance of the appliance should not be performed by children unless they are 8 years or older and are supervised by a competent person. • If the socket does not match the refrigerator plug, it must be replaced by the manufacturer, its service agent or similar qualified persons in order to avoid a hazard.
  • Page 8 WARNING: Risk of fire / flammable materials WARNING: Do not damage the refrigerant circuit. WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer. WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
  • Page 9 • Pursuant to Commission Regulation (EU) 2019/2019, the minimum availability period for spare parts necessary to repair the appliance is 7 or 10 years depending on the type and purpose of the spare part. • The list of spare parts and the ordering procedure are available on the websites of the manufacturer, importer or an authorized representative.

  • Page 10: Recommended Storage

    Recommended storage Compartment Target Appropriate food type storage temp. Freezer ≤-18 Seafood (fish, shrimp, shellfish), freshwater aquatic products and meat products (recommended for 3 months, the longer the storage time, the worse the taste and nutrition), suitable for frozen fresh food. Freezer ≤-18 Seafood (fish, shrimp, shellfish), freshwater aquatic...

  • Page 11: Freezer Controls

    Freezer controls A. Freezer temperature adjustment sensor This button is used to adjust the temperature within the freezer. Press this sensor once to activate adjustment, and then as many times as necessary until the desired level is selected. The settings range from -16 to -24 with being -16 warmest and -24 being the coldest.
  • Page 12 Adjusting the temperature The control panel is located inside the appliance on the top wall of the refrigerator compartment. It allows you to change the temperature in both chambers. Touch few times sensor to change the temperature, on the display set value will flash. If you want to turn off the appliance, touch sensor.
  • Page 13 • Do not put food into the fridge freezer before it has reached its operating temperature, which takes minimum 4 hours. • Do not change the temperature settings due to the change in the season of the year. The ambient temperature increase will be detected by the sensor and the compressor will be switched on automatically for a longer period of time in order to maintain the temperature set inside the chambers.

  • Page 14: Installation

    Installation This refrigeration appliance is intended for use as a built-in appliance. WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.” Installation before using the appliance for the first time • Take the product out of the package, remove the scotch tape protecting the door and the equipment.
  • Page 15 WARNING: Keep ventilation openings, in the appliance enclosure or in the built - in structure, clear of obstruction Minimum distances from the heat sources • from the electric gas and other ovens - 30 mm • from oil or coal fired ovens - 300 mm •...

  • Page 16: Electrical Information

    Electrical information Warning! This appliance must be earthed. Green and Yellow to Earth Brown to Liv e 13 Amp fuse Cord Clamp Blue to Neutra l The mains lead of this appliance has been fitted with a BS 1363A 13 amp fused plug.

  • Page 17: Mains Connection

    Mains connection Prior to connection, it is recommended to set the temperature control knob to an “OFF” or other position that disconnects the appliance from the power supply. • This appliance should be connected to AC 220-240V 50Hz supply socket. The socket must be fitted properly, and must be supplied with an earthing conduit and a 10A fuse.
  • Page 18 Climate range The information about the climate range of the appliance is provided on the rated plate. It indicates at which ambient temperature (that is, room temperature, in which the appliance is working) the operation of the appliance is optimal (proper). Climate class Allowable ambient temperature Extended...
  • Page 19 Maintenance, care and cleaning Never clean the product’s casing or plastic parts using solvents or strong, abrasive detergents (e.g. washing powders or creams)! Use mild liquid detergents and soft cloths only. Do not use sponges. External surfaces made of plastic should be cleaned with a microfiber cloth, otherwise irreversible micro scratches will appear.
  • Page 20 Defrost the freezer chamber following steps:** • Switch off the appliance using the control panel and pull the plug out from the socket. • Open the door and remove any food from the freezer. • Depending on the model, pull out the drainage tube located in the bottom of the freezer compartment and place a suitable vessel underneath.

  • Page 22: Reversing The Door

    Reversing the door It is possible to reverse the door on this appliance, if required. To do so, follow the steps below: 1. Before reversing the door opening direction, unplug the appliance and remove all food. 2. Using a flat head screwdriver, pry and remove the hinge caps. 3.
  • Page 23 14. Switch on the appliance as described in the relevant section of its operating instructions. * This action applies to appliances with both refrigeration and freezer chambers.

  • Page 24: Troubleshooting

    Troubleshooting If you have any problems with your appliance, you should check the troubleshooting prior to calling CDA Customer Care, to prevent unnecessary service calls and potential cost. Contact details for CDA Customer Care can be found below. CDA Customer Care...
  • Page 25 Problem Possible causes Remedies Incorrect setting of the Reset the knob to a higher adjustment knob position The ambient temperature is The appliance is adapted to higher or lower than the operation in the climate range from climate range from table table with technical specification with technical specification The appliance is located in...
  • Page 26 Notes...
  • Page 27 Notes...
  • Page 28 01949 862 012 or email customer.care@cda. co.uk For more information please contact: The Sales Department on 01949 862 010 or email sales@cda.co.uk Customer Care Department. The CDA Group Ltd, Harby Road, Langar, Nottinghamshire, NG13 9HY 01949 862 012 01949 862 003 customer.care@cda.co.uk...

Table of Contents