CDA FW482 Installation, Use And Maintenance Manual

Integrated in column freezer

Advertisement

FW482
Integrated In Column
Freezer
Installation, use and maintenance
www.cda.eu

Advertisement

Table of Contents
loading

Summary of Contents for CDA FW482

  • Page 1 FW482 Integrated In Column Freezer Installation, use and maintenance www.cda.eu...
  • Page 2: Table Of Contents

    Contents: Important information Important safety warnings Before first use Setting the temperature Guidance on use Care and cleaning Defrosting the freezer Troubleshooting Installation Electrical information...
  • Page 3 Appliance information: Please enter the details on the appliance rating plate below for reference, to assist CDA Customer Care in the event of a fault with your appliance and to register your appliance for guarantee purposes. Appliance Model...
  • Page 4: Important Information

    This appliance has been manufactured to the strictest standards and complies with all applicable legislation, including Electrical safety (LVD) and Electromagnetic interference compatibility (EMC). Parts intended to come into contact with food conform to 1935/2004/EC. IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EU DIRECTIVE 2012/19/EU.
  • Page 5: Important Safety Warnings

    Important safety warnings Never store inflammable or explosive items and strong corrosive acids or alkalis in the appliance. This is a household appliance, which is produced in accordance with the national standard. It is intended for food storage only, not for storage of blood, medicine and biological products.
  • Page 6: Before First Use

    Before first use You must allow the freezer to settle for at least twenty four hours prior to switching the power on. It is recommended that you clean the interior of the appliance prior to first use, using a solution of bicarbonate of soda and warm water and then thoroughly drying the interior.
  • Page 7 General notes on use Freezer • Never touch or the lick the sides of the freezer, especially with wet hands. • Never put hot foods in the refrigerator. Warm food should be allowed to cool to room temperature before being put into the freezer.
  • Page 8: Care And Cleaning

    Care and cleaning Always disconnect the appliance from the power supply before any cleaning or maintenance. The freezer should be cleaned using a solution of bicarbonate of soda and lukewarm water. Do not use abrasive products or detergents. After washing, rinse and dry thoroughly. Clean the drawers separately by hand with soap and water.
  • Page 9: Defrosting The Freezer

    Defrosting the freezer Do not use heaters or defrosting sprays in this appliance. • Never use any metallic or sharp objects to remove the ice as this could damage the lining. • The freezer compartment should be defrosted regularly to ensure the most efficient running of the freezer.
  • Page 10: Troubleshooting

    Troubleshooting If you have any problems with your appliance, you should check the troubleshooting prior to calling CDA Customer Care to prevent unnecessary service calls and potential cost. If the appliance is not working, check: • There is power to the appliance: •...
  • Page 11 • Check the door seal for any kinks, debris or damage. If you notice any, and are unable to resolve the issue yourself, contact CDA Customer Care so that the seal can be replaced. •...
  • Page 12: Installation

    Installation This appliance must never be installed close to heat sources such as radiators, heating elements, cookers or in damp places. Nor should it be installed in rooms or areas (such as garages) whose ambient temperature will fall or rise outside of the climate class limitations (approx.
  • Page 13: Electrical Information

    Electrical information Warning! This appliance must be earthed. The mains lead of this appliance has been fitted with a BS 1363A 13 amp fused plug. To change a fuse in this type of plug, follow the steps below: 1. Remove the fuse cover and fuse. 2.
  • Page 14 Do not shorten the supply cable, the appliance may require removing for servicing. N.B. Ensure that the plug socket is situated in an easily accessible place. If the power supply cord is damaged, it must replaced by a CDA authorised agent.
  • Page 15 NOTES:...
  • Page 16 For more information please contact: The Sales Department on 01949 862 010 or email sales@cda.eu Customer Care Department. The CDA Group Ltd, Harby Road, Langar, Nottinghamshire, NG13 9HY 01949 862 012 F: 01949 862 003 E: customer.care@cda.eu www.cda.eu...

Table of Contents