Table of Contents
Advertisement
OPTIONAL ACCESSORIES
FORCED AIR kIT
If you are installing the forced air kit (Models BLO4-T, BLO4-TB or BLOT), see the installation
instructions provided with the kit for electrical wiring requirements or the blower installation sec-
tion.
Model 4VFSC uses blower model BLO4T.
Model 3VFSC uses blower model BLOT.
Model DBX4C uses blower model BLO4TB.
The firebox must be connected to main power supply at time of firebox installation. The blower must
be installed prior to the installation of the unvented heater. The electrical connections must be made
before the firebox is framed and enclosed in the finished walls.
BRASS LOUVERS
Optional brass louvers may be installed in place of the factory installed black louvers. See installa-
tion instructions provided with the brass louvers.
FIREBRICkS
Optional firebrick kits can be installed. See installation instructions provided with kit or Page 32.
Electrical connections should only be performed by a qualified, licensed
electrician, main power must be off when connecting to main electrical
power supply or performing service.
33D4051
VFS & DBX Series Vent Free Fireplaces
31
Advertisement
Table of Contents
