Assembly - Image IMTL11900 User Manual

Image user's manual 1050se treadmill imtl11900
Table of Contents

Advertisement

ASSEMBLY

Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench
and your own wire cutters
Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a
small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal
condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off
the lubricant with a soft cloth and a mild, non-abrasive cleaner.
1. With the help of a second person, carefully raise the
Uprights (80) until the treadmill is in the position shown.
2. Cut any plastic ties from the Right and Left Handrails (93,
94). Set the Right Handrail (the longer Handrail) on the
right Upright (80). Finger tighten a Short Handrail Bolt
(59) with one of the two metal Handrail Washer (95) into
the Upright and the Right Handrail. Do not tighten the
Handrail Bolt yet.
Attach the Left Handrail (94) as described above.
3. Insert a Long Handrail Bolt (37) with one of the four
Washers (60) and a Plastic Washer (53) into the lower
end of the Right Handrail (93). Finger tighten the Long
Handrail Bolt into the Frame (87).
Next, hold an Upright Spacer (11) inside the lower end of
the right Upright (80). Insert an Upright Bolt (7) with a
Washer (60) through the Upright and the Upright Spacer,
and finger tighten the Upright Bolt into the Frame (87).
Repeat this step on the left side of the treadmill (not shown).
Tighten the three Bolts (7, 37) on each side. Tighten the
two Short Handrail Bolts (59) shown in step 2.
4. Make sure that all parts are tightened before you use the treadmill. Keep the included allen wrench in a
secure place. The allen wrench is used to adjust the walking belt (see pages 12 and 13). To protect the floor
or carpet from damage, place a mat under the treadmill.
(not included).
5
1
80
2
59
95
94
3
93
87
60
37
53
59
95
93
80
80
7
11
60
7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1050se

Table of Contents