Assembly - Image 15.5 S User Manual

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480. Assembly
requires two persons. Set the treadmill in a cleared area and remove the packing materials; do not dispose of
the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated
with high-performance lubricant. During shipping, lubricant may be transferred to the top of the walking belt or to
the shipping carton. This is normal and does not affect treadmill performance. If there is lubricant on top of the
walking belt, wipe it off with a soft cloth and mild, non-abrasive cleaner.
Assembly requires the included hex keys
wrench , rubber mallet
To identify assembly hardware, see the drawings below. The number in parentheses below each drawing is the
key number of the part, from the PART LIST in the center of the manual. The number following the parentheses
is the quantity used in assembly. To avoid damaging plastic parts, do not use power tools for assembly.
Handrail Bolt (20)–4
Upright Bolt/Wheel Bolt (40)–6
Frame Bolt (32)–2
1. Orient the Base (48) as shown.
Identify the Right Upright (36), which has a
square hole near the lower end.
Orient the Right Upright (36) as shown, and
attach it to the Base (48) with two Upright Bolts
(40) and two Upright Star Washers (39); do not
tighten the Upright Bolts yet.
All manuals and user guides at all-guides.com
and your own Phillips screwdriver
, and wire cutters
3/4" Screw (2)–6
Silver Ground
Screw (27)–2
Console
Bolt (22)–2
6
.
Wheel Spacer
(44)–4
Frame Washer
(33)–2
Nut (47)–4
1
36
48
, adjustable
1/4" Star Washer
(21)–2
Handrail Star
Washer (19)–4
Upright Star
Washer (39)–4
39
Square
40
Hole
39
40