Pre-Test Checklist; Operation Checklist - GE JP960 Installation Instructions Manual

Installation Instructions

Pre-Test Checklist

Remove all protective film if present,
and any stickers.
Check to be sure that all wiring is
secure and not pinched or in
contact with moving parts.

Operation Checklist

Remove all items from the top of
the cooktop surface.
Turn on the power to the cooktop.
(Refer to your Use and Care
Manual.) Verify all surface
bruners opate properly.
Check that the circuit breaker is
not tripped or the house fuse is
blown.
Check that conduit is securely
connected to the junction box.
See Use & Care manual for
troubleshooting list.
NOTE TO ELECTRICIAN:
The power leads supplied with
this appliance are UL
recognized for connections to
larger gauge household wiring.
The insulation of these leads is
rated at temperatures much
higher than the temperature
rating of household wiring. The
current carrying capacity of a
conductor is governed by the
wire gauge and also the
temperature rating of the
insulation around the wire.
Check level of appliance.
Check that the cooktop is properly
grounded.
NOTE: ALUMINUM WIRING
A. WARNING:
IMPROPER CONNECTION OF
ALUMINUM HOUSE WIRING TO THE
COPPER LEADS CAN RESULT IN A
SERIOUS PROBLEM.
B. Splice copper wires to aluminum
wiring using special connectors
designed and UL approved for joining
copper to aluminum and follow the
manufacturer's recommended
connector procedure closely.
NOTE:Wire used, location and enclosure
of splices, etc., must conform to good
wiring practice and local codes.
8
Pub. No. 31-10429
4053P126-2
229C