Installing The Cooktop - GE JP960 Installation Instructions Manual

Installation Instructions

Installing the Cooktop

B
Installing the Junction Box.
Install an approved junction box where
B1
it will be easily reached through the
front of the cabinet where the cooktop
will be located. The cooktop conduit
is 3 feet long,
Install junction box
so that it can be reached
through the front of
the cabinet.
IMPORTANT: The junction box
must be located where it will
allow considerable slack in the
conduit for serviceability.
Protect Surface of Cooktop
Place a towel or table cloth onto the
B2
counter top. Lay the cooktop upside
down onto the protected surface.
Bottom of cooktop
Cloth under Cooktop
16"
Min.
5
Attach Foam Stips
Apply the foam strips around the outer
B3
edge of the glass. Do not overlap the
foam strips.
Bottom of
Cooktop
Foam Strips
Cooktop
Glass
Locate Mounting Parts
B4 Remove the hold down brackets
and screws from the literature
package.
Attach Brackets to Cooktop
B5 Screw the Hold Down Bracket to the
side of the cooktop unit. Repeat for
opposite side of cooktop.
Bottom of
Cooktop
Foam Strips
Cooktop
Glass
(Continued on following page)
MOUNTING
SCREW
Pre-drilled
hole
Hold Down
Bracket