2.
Disconnect the Molex plug from switch
assembly.
3.
Press the back of switch assembly and push the
switch assembly out of the housing.
Water Recirculation Pump
Remove the ice from the storage bin prior to
removing the recirculation pump.
Note: Pump operates on 12 VAC and has a
resistance of 3.8Ω.
To remove the water recirculation pump:
1.
Unscrew the drain cap from the reservoir, drain
the water, and replace the cap tightly.
2.
Remove the hex-head screw from the water
recirculation pump shield and remove the shield.
Drain Cap
3.
Disconnect the water fi ll tube from the pump
mounting bracket.
4.
Disconnect the wire recirculation and drain
pump connectors from the harness block.
Disconnect
– 22 –
Disconnect
Water Fill Tube
(Continued next page)