Technical Data; Noise/Vibration Information - Skil 5601 Operating Instructions Manual

TECHNICAL DATA

Circular Saw
Article Number
Power
Frequency
Amperege 127 V
220 V
No-load speed
Cutting depht at 90˚, máx
Cutting depht at 45˚, máx
ø Saw Blade diam (máx.)
Mounting hole
Blade thickess, máx.
Teeth thickness/ teeth
settings, máx.
Teeth thickness/ teeth
settings, min.
Base Plate
Spindle lock
Soft Grip
Laser Guide
Led Light
Weight according to EPTA 01/2003 kg
Protection class
The values given are valid for nominal voltages [U] of 127 V or 220 V. For lower voltage and models for specific countries, these values can
vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.

NOISE/VIBRATION INFORMATION

Measured values determined according to EN
60745.
Typically the A-weighted noise levels of the prod-
uct are: Sound pressure level 96 dB(A);
Sound power level 107 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Vibration emission value a <2.5 m/s
h
ty K =1.5 m/s 2 .
The vibration emission level given in this informa-
tion sheet has been measured in accordance with
a standardised test given in EN 60745 and may
be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
5401
F 012 5401...
[W] 1.400
[Hz] 50 / 60
[A] 11,6
[A] 6,7
[/min] 5700
[mm] 62
[mm] 49
1
[mm] 184 (7"
[pol.] 5/8"
[mm] 1,5
[mm] 2,5
[mm] 2,5
142 x 290
Yes
No
No
No
4,3
/II
The declared vibration emission level represents
the main applications of the tool. However if the
tool is used for different applications, with differ-
ent accessories or poorly maintained, the vibration
emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration
should also take into account the times when the
tool is switched off or when it is running but not ac-
tually doing the job. This may significantly reduce
the exposure level over the total working period.
2 , Uncertain-
Identify additional safety measures to protect the
operator from the effects of vibration such as:
maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.
26
5601 5801
5601... 5801...
1.600 1.800
50 / 60 50 / 60
13,3 14,9
7,6 8,6
5200 5000
60,5 60,5
45 45
1
/ ) 184 (7" / ) 184 (7"
4 4
5/8" 5/8"
1,5 1,5
2,5 2,5
2,5 2,5
152 x 285 152 x 285
Yes Yes
Yes Yes
Yes Yes
No Yes
5,1 5,2
/II
1
/ )
4
/II