Chapter 1: Introduction; How To Use This Manual; Cal Column Array Loudspeaker - Meyer Sound CAL Operating Instructions Manual

Column array loudspeaker
Table of Contents

Advertisement

CHAPTER 1: INTRODUCTION

HOW TO USE THIS MANUAL

Make sure to read these operating instructions in their
entirety before configuring a loudspeaker system with CALs.
In particular, pay close attention to material related to safety
issues.
As you read these operating instructions, you will encounter
the following icons for notes, tips, and cautions:
NOTE:
A note identifies an important or useful
piece of information relating to the topic under
discussion.
TIP:
A tip offers a helpful tip relevant to the topic
at hand.
CAUTION:
A caution gives notice that an
action may have serious consequences and
could cause harm to equipment or personnel, or
could cause delays or other problems.
Information and specifications are subject to change.
Updates and supplementary information are available at
www.meyersound.com.
Meyer Sound Technical Support is available at:
Tel: +1 510 486.1166
Tel: +1 510 486.0657 (after hours support)
Web:
www.meyersound.com/support
Email:
techsupport@meyersound.com

CAL COLUMN ARRAY LOUDSPEAKER

The CAL™ steerable column array loudspeaker combines
over three decades of technological innovation and
advanced research into the laws of physics and digital signal
processing to achieve unprecedented accuracy in sound
reproduction. Designed primarily for vocal reproduction in
fixed installations, the self-powered CAL offers vertical
beam spreads as narrow as 5 degrees and as wide as
30 degrees that can be digitally steered up or down by
30 degrees. CAL's beam steering takes the practice of
directing sound to the next level, and with a smart, lean pro-
file, CAL sets the standard for high-quality sound installa-
tions.
CAL 96, CAL 64, and CAL 32 (Shown without Grille Frames)
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cal 96Cal 64Cal 32

Table of Contents