Table of Contents
Advertisement
CHAPTER 6: MOUNTING CAL LOUDSPEAKERS
CAL comes standard with adjustable brackets that allow it
to be mounted on walls or columns.
NOTE:
Before mounting CAL, make sure to
allow for the necessary cable runs to its audio
sources, host computer, and any control devices or
switches you intend to use.
IMPORTANT SAFETY CONSIDERATIONS!
When installing Meyer Sound loudspeakers, the following
precautions should always be observed:
■
All Meyer Sound products must be used in accordance
with local, state, federal, and industry regulations. It is
the owner's and user's responsibility to evaluate the reli-
ability of any rigging or mounting method for their appli-
cation. Rigging should only be carried out by
experienced professionals.
Use mounting and rigging hardware that has been rated
■
to meet or exceed the weight being hung.
■
Make sure to attach mounting hardware to the building's
structural components (studs or joists), and not just to
the wall surface. Verify that the building's structure and
the anchors used for the installation will safely support
the total weight of the mounted loudspeakers.
■
Use mounting hardware appropriate for the material
where the loudspeaker will be installed.
■
Make sure bolts are tightened securely. Meyer Sound
recommends using Loctite
■
Inspect mounting and rigging hardware regularly. Imme-
diately replace any worn or damaged components.
®
on bolt threads.
CAL WALL MOUNT BRACKETS
CAL comes standard with wall mount brackets that include
the following components.
CAL Wall Mount Bracket Components
Item
Wall Mount
Plate
(Top)
Wall Mount
Plate
(Bottom)
Loud-
speaker
Bracket
(Top)
Loud-
speaker
Bracket
(Bottom)
Endcap
(Top)
Endcap
(Bottom)
5/16 x 5"
Quick-
release pins
(2)
Part
Fasteners
Number
Included?
64.210.018.01
No
(Black)
(Use fasteners
64.210.018.02
appropriate for
(White)
wall material)
64.210.031.01
No
(Black)
(Use fasteners
64.210.031.02
appropriate for
(White)
wall material)
64.210.015.01
Yes
(Black)
(Hardware
64.210.015.02
included to
(White)
attach bracket
to loudspeaker)
64.210.032.01
Yes
(Black)
(Hardware
64.210.032.02
included to
(White)
attach bracket
to loudspeaker)
60.210.012.01
Yes
(Black)
(Hardware
60.210.012.02
included to
(White)
attach endcap
to loudspeaker)
60.210.013.01
Yes
(Black)
(Hardware
60.210.013.02
included to
(White)
attach endcap
to loudspeaker)
134.046
—
27
Advertisement
Table of Contents
