BT Quartet 3500 User Manual page 14

Combined cordless telephone and digital answering machine
Hide thumbs Also See for Quartet 3500:
Table of Contents

Advertisement

Quartet 3500
01/07/03
Quartet 3500 User Guide ~ 5th Edition ~ 17th January '03 ~ 4393
3
Connect the base unit
power supply to a power
socket
The green Power/In use light will come
on when the power is switched on.
The power supply unit must remain
plugged in all the time.
Do not connect the telephone line
cord to the phone socket until the
handset is fully charged.
prevent the risk of the phone being
answered before the batteries are
charged, which may prevent them
from reaching maximum capacity.
4
Charge the handset
Your handset comes with a
rechargeable battery pack pre-installed
but the battery pack will need
charging.
16:11
Page 11
Note
This will
When you first use your Quartet 3500,
the rechargeable battery pack in the
handset needs charging for 24 hours.
Place the handset on the base unit,
ensuring the contacts are touching.
The red CHARGING light will come on.
The charging light will remain
constantly lit while the handset is
placed on the base unit, even when the
handset batteries are fully charged.
Note
When fully charged and in good
condition, the handset will provide up
to 7 hours talktime or 72 hours standby.
If you are making a call and the
handset battery is running low you
will hear a warning tone every
10-15 seconds.
Place the handset on the base unit to
recharge.
However, the charge capacity of
rechargeable batteries will reduce with
time as they wear out, so reducing the
talk/standby time of the handset.
Eventually they will need to be replaced.
New battery packs can be obtained
from the Helpline. Please see page 60
for instructions on how to install a new
battery pack.
11

Advertisement

Table of Contents
loading

Table of Contents