Product Specifications; Performance Claims; Variable Salt Dose - Whirlpool WHES45 Installation And Operation Manual

Product Specifications

Performance Claims

Variable Salt Dose

30
Rated Service Flow Rate (gpm)
Amount of High Capacity Resin (cu ft)
Pressure Drop at Rated Service Flow (psig)
Water Supply Max. Hardness (gpg)
Water Supply Max. Clear Water Iron (ppm)*
Water Pressure Limits (min./max. psi)
Min. --- Max. Water Temperature (˚F)
Min. Water Supply Flow Rate (gpm)
Max. Drain Flow Rate (gpm)
Salt storage capacity
*Capacity to remove clear water iron is substantiated by WQA test data. State of Wisconsin requires
additional treatment if water supply contains clear water iron exceeding 5 ppm.
Rated Softening Capacity
(Grains @ Salt Dose)
Rated Efficiency (Grains/Pound of Salt @
Minimum Salt Dose)
This system conforms to NSF/ANSI 44 for the specific performance claims as verified and
substantiated by test data.
The efficiency rating is only valid at the stated salt dose. This softener was efficiency rated according
to NSF/ANSI Standard 44.
The salt dose is selected by the electronic controls at regeneration time based on the amount needed.
WHES 45
10.0
1.26
11
125
12
20 --- 125
40 --- 120
3
2.3
300 lbs.
WHES 45
13,300 @ 2.6 lbs.
35,700 @ 9.9 lbs.
45,400 @ 17.2 lbs.
5,120 @ 2.6 lbs.