Tube Channel Assembly Replacement - Quadra-Fire 31I-ACC Owner's Manual

R
E. Tube Channel Assembly Replacement
Removing Tube Channel Assembly
1. Remove the right side bricks (4 pieces).
2. Remove the baffle protection channel by rolling forward
and out of the firebox.
. Locate the 2 channel nuts and 1 bolt inside of chamber
and remove using a 7/16 socket wrench.
NOTE: Soak the bolts with penetrating oil for at least 15 min-
utes before trying to remove them.
Figure 23.1
February 10, 2010
3 Tube Channel Nuts
Baffle Boards
Ceramic Blanket
4. Slide the tube channel assembly all the way to left until
it is off the threads. Drop the right side down, then slide
the assembly back to right.
5. The ceramic blanket and both baffle boards can be
removed at the same time you remove the tube channel
assembly.
6. When the tube channel assembly is free of the left side
support, rotate clockwise and pull assembly, blanket and
baffles out through the front opening.
7. Re-install in reverse order.
Tube Channel
Assembly
1
1
Baffle Protection Channel
7044-140B
3100-I ACC Wood Insert
1
2
3
4
Rotate and
remove from
firebox
1
4
Page 2