Tube Channel Assembly Replacement - Quadra-Fire 41I-ACC Owner's Manual

G. Tube Channel Assembly Replacement
Removing Tube Channel Assembly
1. Remove the right side bricks (3 pieces).
2. Remove the baffl e protection channel by rolling forward
and out of the fi rebox.
3. Locate the 2 channel nuts and 2 channel bolts inside of
chamber and remove.
NOTE: Soak the bolts with penetrating oil for at least 15 min-
utes before trying to remove them.
4. Slide the tube channel assembly all the way to left until it
Baffle Boards
Figure 25.1
February 25, 2016
is off the threads. Drop the right side down, then slide
the assembly back to right.
5. The ceramic blanket and both baffl e boards can be
removed at the same time you remove the tube channel
assembly.
6. When the tube channel assembly is free of the left side
support, rotate clockwise and pull assembly, blanket and
baffl es out through the front opening.
7. Re-install in reverse order.
2 Tube Channel Nuts
2 Tube Channel bolts
Ceramic Fiber
Blanket
7045-909D
Baffle Protection Channel
41I-ACC
25