Selecting Traffic Information To Display; Checking Traffic Flow Information On The List; Set Use Of Traffic Flow Information Setting Off - Pioneer AVIC-D3 Operation Manual

~
"Set use of Traffic flow information setting to
-+
Page
60
o
Touching
"All"
selects all the traffic infor-
mation.
4
Touch "Done".
The selected information icon is added
to the screen.
o
Touch
"Back"
to cancel your selection.
o
The following types of traffic
{ ' ( H 1 f H . ' C T
cannot be deselected and are always dis-
stop and go, stopped traffic, and
roads.
in the
flow infor-
instead of You can use
Checking traffic flow information on the
list
The traffic flow information on the route can also
be displayed as an onscreen list.
o
The method for checking the traffic flow infor-
mation displayed on the screen is the same
all information".
~
"Checking all traffic information"
-+
57
1
Touch "lnfolTraffic" in the NAVI MENU,
then touch "Traffic Flow".
~
z
_ 0 You can turn off the use of
mation.
to
"Off".
The button
3
Touch "Back".
o
If you wish to use the traffic flow information
, touch "Off" to turn the button "On" in
the Traffic Settings screen.
2
Touch "On".
Set use of Traffic flow information set-
ting to off
1
Touch "Info/Traffic" in the NAVI MENU,
and then touch "Traffic Settings".
5
Touch "Back".
events list screen. The list with the traf-
fic flow information is shown.
The list will be sorted according to the average
speed by touching
Selecting traffic information to
display
There are different types information
that can be received via the
XM
NavTraffic ser-
and you can select which will be incor-
porated and displayed on your
1
Touch "Info/Traffic" in the NAVI MENU,
and then touch "Traffic Settings".
2
Touch "Change".
The names of the displayed traffic information
items and a Iist of icons appears on the
screen.
OJ
c
E
;B
3
Touch the traffic information item to dis-
play.
A red check appears next to the selected traf-
fic information.
60