Pioneer AVIC-D3 Operation Manual page 145

Symptom Cause Action (See)
The daylight display is used
when the vehicle are on.
The volume level will not rise.
A strange sound is heard when the
vehicle comes close to a certain
Your vehicle is operating In Simple
hybrid mode.
"Daytime" is set to "Day/Night Dis-
play".
The orange/white lead is not con-
nected.
"Nighttime" is selected on "Day/
Night Display".
The vehicle cabin temperature is
low.
The sound for the entl"j of "Address
Book" is set.
Connect the speed signal (pink
lead wire) of the power cable cor-
and the 3D Sen-
Le,unllng Status").
must be installed
within the allowed installation
For details, refer to "Installation Man-
ual".)
tings (-+ 74) and make sure
"Always" or "This Trip" is selected.
Check the "Day/Night Display" set-
(-+ 74) and make sure
"Nighttime" is selected.
Check the connection.
play"
(-+ 74) and, if
desired, select "Daytime".
A
liquid Crystal Display (LCD) is
used, and such tend to
darken when cold. Wait for the vehi-
to warm
quality.
up or
ing to "Volume" (-+
"Settings" menu.
Set the sound setting of that entry to
"No Sound".
(-+
54)
»
"C
"C
C' D
::::s
Co
x·
UI01JIUVGU
on
Vehicle Dynamics screen. nected.
Inclination does not move on the 3D
Calibration screen.
143