Selecting Traffic Information To Display - Pioneer AVIC-Z2 Operation Manual

traffic information on your route, notification icon
is displayed on the navigation map screen.
❒ Notification icon will not be available when
your vehicle deviate from route.
❒ Traffic flow information is taken into account
only when [Traffic Flow] in [Traffic Set-
tings] is checked.
1
Set [Show Traffic Incidents] to [View].
➲ "Show Traffic Incident" ➞ Page 48
2
Press the MAP button to display the cur-
rent location.
The icon appears when the system acquires
traffic information on the current route.
3
Touch icon during the icon is displayed.
The displayed icon indicates the type of the
traffic information.
4
Touch [Detour] to search for an alterna-
tive route.
❒ [Detour] will be enable only when the sys-
tem can find "traffic congestion".
After touching [Detour], the route is recalcu-
lated taking all traffic congestion on your cur-
rent route into account.
❒ "Notification icon" shows the nearest traf-
fic information on the route. However, if
you touch [Detour], the route is recalcu-
lated by taking into account not only this
information, but also all traffic congestion
information on the route.
72
Notification icon
On this screen, you can select the following
items:
[List]:
Only three proximate traffic events on your
route are listed in this traffic list.
[Back]:
The message disappears, and the map display
reappears.
For the subsequent operations, see "Checking
traffic congestion automatically".
➲ "Checking traffic congestion automatically" ➞
Page 71
Selecting traffic information to
display
There are different types of traffic information
that can be received via the XM NavTraffic ser-
vice, and you can select which types will be incor-
porated and displayed on your navigation system.
1
Touch [Information] in the navigation
menu, and then touch [Traffic Settings].
2
Touch [Displayed traffic information].
The names of the displayed traffic information
items and a list of icons appears on the
screen.
3
Touch the traffic information item to dis-
play.
A red check appears next to the selected traf-
fic information.
❒ [Traffic Flow] includes not only whether
or not to display the icon on the map, but
also whether or not to take the flow infor-
mation into account when rerouting.