Installation Using The Screw Holes On The Side Of The Navigation Unit; Fastening The Navigation Unit To The Factory Radio-Mounting Bracket - Pioneer AVIC-D3 Operation Manual

Installation using the screw holes on the side of the navigation unit
1. Fastening the navigation unit to the factory radio-mounting bracket.
Position the navigation unit so that the brackets screw holes and its screw holes are aligned
(are fitted), and tighten the screws at 3 or 4 locations on each side. Use either the binding
screws (5 x 6 mm) or flush surface screws (5 x 6 mm), depending on the shape of the
bracket's screw holes.
~
-----
;--,...
irel
(~ ~
i
e1
®
~~ ~,!J
0
D
~
(;)@
----
_.
(J)
::r
Factory radio mounting
Be sure to use the
screws supplied
with this navigation
system.
If the pawl gets in the
way, bend it down
-