Bose VIDEOWAVE II Setup Manual page 14

Tab 8, 16 Tab 7, 15
P S
HYSICAL ETUP
3. Attach the monitor cable and AC power cord to the
monitor as shown.
Monitor cable
AC power
cord
Note: You do not need to re-attach the connector cover.
Hiding the cables behind the monitor may be easier with
the cover removed.
14
Tab 6, 14 Tab 5, 13 Tab 4, 12 Tab 3, 11
4. Attach the wall-mounting brackets (not included)
to the wall and monitor according to the instruc-
tions included with the wall bracket.
5. Lift the monitor out of the packing.
WARNING: The monitor weighs about 119 lbs. (59 kg).
To prevent personal injury, a two-person lift is required.
6. Attach the monitor to the wall according to the
instructions included with the wall bracket.
Note: If using an AC (mains) outlet that is on the wall
behind the monitor, be sure to plug in the power cord
before hanging the monitor.
Tab 2, 10 English