Wall-Mounting The Monitor - Bose VIDEOWAVE II Setup Manual

English Tab 2, 10
7. Push monitor back to within 1-4 in. (2.5-10 cm)
from the wall.
1 - 4 in.
(2.5 - 10.0 cm)
Tabletop
8. Tighten the straps to remove any slack between
the monitor and the wall.
9. Bundle the remaining length of the straps and
secure them out of reach behind the monitor.
Tab 3, 11 Tab4, 12 Tab 6, 14 Tab 5, 13

Wall-mounting the monitor

The VideoWave ® system is compatible with any VESA
certified bracket that uses a 400 mm x 400 mm screw
pattern. The panel itself without the stand weighs
119 lbs. (59 kg), so the mount must be able to support
that weight. Articulating wall mounts are not optimal
because of the effect that changes in position might
have on the acoustics and are therefore not
recommended.
1. Remove the bag from the monitor.
2. On the rear panel of the monitor, firmly pull out on
the bottom of the connector cover (A) then pull
down (B) to remove it.
B
A
Tab 7, 15 Tab 8,16
P S
HYSICAL ETUP
13