Configuring Basic H.323 Parameters - 3Com V7122 Installation Manual

The following configuring Sections from here up to and including
SIP Parameters
H.323 configuring continues with
SIP configuring continues with
Once the gateway is configured correctly back up your settings by making a copy of
the VoIP gateway configuration (ini file) and store it in a directory on your PC. This
saved file can be used to restore configuration settings at a future time. For
information on backing up and restoring the gateways configuration, see
Restoring and Backing Up the V7122 Configuration

Configuring Basic H.323 Parameters

After accessing the Embedded Web Server (see
H.323 Quick Setup screen is displayed.
V7122/H.323 Quick Setup
Figure 13
To configure basic H.323 parameters, follow these 8 steps:
If the V7122 gateway is connected to a router with NAT enabled, perform the following
1
procedure. If it is not, leave the NAT IP Address field undefined.
Determine the "public" IP address assigned to the router (by using, for instance,
router Web management). Enter this public IP address in the NAT IP Address field.
V7122 Digital Gateway Installation Guide
apply individually to H.323 or SIP.
Configuring Basic H.323
Configuring Basic SIP
Parameters.
Parameters.
Accessing the Embedded Web
Configuring Basic
Chapter 5:
Server) the
29