Av Input Setup; Av Interface Setup - Kenwood DNX6960 Instruction Manual

AV Input Setup
I You can set AV input parameters.
I
I
D
Display the AV-IN Setup screen
I .
I
i
Touch [Ga]
> [,....,] >
[AV-IN SETUP] (page 62)
D
Set each item
i
[On Screen AV-IN] Sets an on-screen display
of the AV-IN playback screen. (1;! "Auto")
"Auto": Information is displayed for 5 seconds
when updated.
"Manual": Information is displayed when you
touch on the screen.
[iPod AV Interface Use] Sets the terminal to
which the iPod is connected to.
(1;1
"iPod")
[AV-INl Name], [AV-IN2 Name] Sets a name
to be displayed when you select a system that
is connected via the AV INPUT port.
(:;: "VIDEO")
Q
~
• [iPod AV Interface Use]
This item can be set when in STANDBY source and also
the iPod is unconnected.
• [AV-IN Name]
One AV-IN name is displayed when "iPod" is selected in
[iPod AV Interface Use] and two are displayed when not
selected .
•
DDX SERIES DDX616/DDX6046BT/DDX516
AV Interface Setup
You can set audio and visual (AV) interface
parameters.
D
Display the AV Interface screen
Touch [Ga]
>
[~]
>
[AV Interface]. (page 62)
fJ
Set each item
[AV-OUT] Selects an AV source to be output at
the AV OUTPUT port.
(i~j
"AV-INl ")
[R-CAM Interrupt] Sets a method to switch to
the rear view camera video display.
(I~
"OFF")
"ON": Switches to the rear camera video
display when "Reverse" gear is engaged.
"OFF": The monitor does not switch to the
rear view camera video display even
when engaging the shift knob of car to
"Reverse".
e
• When in DVD source, "AV-OUT" cannot be set to USB
~
When in USB source, "AV-OUT" cannot be set to DVD.
English 73