Set Station Name; Traffic Information (North American Sales Area Only) - Kenwood DNX6960 Instruction Manual

Idgevlew
F!0~a_d___
99999.99 "
Set Station Name
Assigns a name to a station.
D
Tune in to the station to name
See <Source Control Screen> (page 32).
II
Start Name set
D
Enter the name
See <Character Entry> (page 45) for information
on how to enter a name.
II
End Name set
DDX
SERIES DDX616/DDX6046BT/DDX516
Traffic Information
(North American sales area only)
When a traffIC bulletin starts, any source
IS
switched to the traffic information and it is
displayed automatically.
D
Display the Source Control Screen
See <Source Control Screen> (page 32).
II
Set the Traffic information mode
When the traffic bulletin starts...
The Traffic Information screen appears
automaticaIly.
Traffic Information screen
b\
G
• It is necessary to have Traffic Information function set to
On in order to have the Traffic Information screen appear
automatically.
During the reception of traffic information the adjusted
volume is automatically remembered, so that the next
time it switches to tr.mic information the volume level is
that from the previously adjusted and remembered level.
English
.i
35