Kenwood DNX892 Quick Start Manual

Gps navigation system

Hide thumbs Also See for DNX892:

Instruction manual (143 pages)

Quick start manual (60 pages)

Instruction manual (33 pages)

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

164

165

166

167

168

169

170

171

172

173

174

175

176

177

178

179

180

181

182

183

184

185

186

187

188

189

190

191

192

193

194

195

196

197

198

199

200

201

202

203

204

205

206

207

208

209

210

211

Table of Contents

Quick Links

Quick Start Guide

SISTEMA DE NAVEGACIÓN GPS

Guía de inicio rápido

B5K-0081-00 (KN/RN)

Table of Contents

Chapters

Table of Contents

Troubleshooting

Summary of Contents for Kenwood DNX892

Page 1: Quick Start Guide
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. Model DNX892/ DNX7150BT/ DNX772BH/ DNX692/ DNX572BH/ DNX4150BT...
Page 2: About The Quick Start Guide
About this Unit ............25 to provide clear explanations of the operations. For this reason, they may be different from the actual panels. • In this manual, each model name is abbreviated as follows. – DNX892: DNX8 – DNX7150BT, DNX772BH: DNX7 – DNX692: DNX6 –...
Page 3: Precautions
Kenwood dealer. • When you purchase optional accessories, check Ñ Precautions on handling discs with your Kenwood dealer to make sure that they • Do not touch the recording surface of the disc. work with your model and in your area.
Page 4: Cleaning The Unit
Ñ Acquiring GPS signal Ñ How to reset your unit The first time you turn on this unit, you must wait If the unit or the connected unit fails to operate while the system acquires satellite signals for the properly, reset the unit. first time.
Page 5: Important Information
Neither other factors that may affect safety or timing while Kenwood nor Garmin shall be liable for problems driving. or accidents resulting from failure to observe the Use the navigation system only as a navigational aid.
Page 6: First Step
(Instruction Manual P.99) using. After setting, touch [6]. Ñ Initial setup EXT SW (DNX892, DNX7150BT only) Control the external devices. (Instruction Manual When you first turn on the unit, the screen of the P.96) configuration setting will appear.
Page 7 Ñ iPod/iPhone connection setup Ñ Application link setup When you first select iPod as a source, the setting When you first select Apps as a source, the setting screen of the iPod/iPhone connection will appear. screen for the connection with the device installed the apps will appear.
Page 8 Functions of the Buttons on the Front Panel Ñ DNX892/ DNX7150BT/ DNX772BH HOME Name/Motion Name/Motion 1 s (Reset) • If the unit or the connected unit fails to • Ejects the disc. operate properly, the unit returns to factory • When the panel is opened, pressing closes...
Page 9 Ñ DNX692/ DNX572BH/ DNX4150BT R-CAM Name/Motion Name/Motion 1 Disc insert slot 7 Volume knob • A slot to insert a disc media. • Turning adjusts volume up or down. • Displays the option menu screen. • Pressing for 1 second switches camera view •...
Page 10: Common Operations
1) Press <G> button for 1 second. : Turn on or off the external device power supply. 2) Hold the SD card with the label facing up, (DNX892, DNX7150BT only) and insert it into the slot until it clicks. : Displays the SETUP Menu screen.
Page 11 • You can get additional information about using the navigation system from Help. To display Help, touch [Apps] and then touch [Help]. • For more information about your navigation system, download the latest version of the Owner’s Manual from http://manual.kenwood.com/edition/im386/. English ñ...
Page 12: Manually Avoiding Traffic On Your Route
⿠Taking a detour safe driving judgment at all times. Garmin and JVC KENWOOD will not be responsible for any traffic 1) While navigating a route, touch [ fines or citations that you may receive for failing to 2) Touch [ follow all applicable traffic laws and signs.
Page 13: Updating The Software
2) Select Update. 3) Follow the on-screen instructions. ⿠Updating maps You can purchase updated map data from Garmin or ask your Kenwood dealer or Kenwood service center for details. 1) Go to www.garmin.com/kenwood. ⿠ To eject the disc: 2) Select Update.
Page 14: How To Play Movie/Picture
SD card/ microSD card (DNX892/ DNX772BH/ DNX692/ DNX572BH) Stops playing. (disc media only) 1) Insert the SD card/ microSD card. 2) Replace the front panel. Disconnects the device. (USB device and iPod Playback starts. only) ✎ NOTE ✎ NOTE • To insert SD card or microSD card, refer to “How •...
Page 15 Connect the media you want to play. Radio/ HD Radio tuner: ⿠Station search For the method of connecting, see How to Play Music (P.13). Control the movie/picture by touching the screen. Each area on the screen has a separate function. 1) Touch [AM/FM] to select the band.
Page 16: How To Make A Phone Call
Connect your cell-phone to the unit. How to Make a Phone Call 1) Touch the device name you want to connect You can use your Bluetooth cell-phone when paired in the Bluetooth SETUP screen. to this unit. 2) Touch [ON] of [TEL(HFP)] in the BT Connection Settings screen.
Page 17: Before Installation
the speaker wire may have a short-circuit or touched Call using the preset number the chassis of the vehicle and the protection function 1) Touch [Preset #] to start calling the may have been activated. Therefore, the speaker wire corresponding phone number. should be checked.
Page 18 (3 m) ✎ NOTE • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (eg, the sound may skip). DNX892, DNX7150BT, DNX772BH only DNX892 only DNX892, DNX7150BT, DNX692, DNX4150BT only ñ English...
Page 19 ⿠Toyota/Scion cars (DNX892) Ñ Trim plate (DNX892, DNX7150BT, DNX692, DNX4150BT) 1) Cut out accessory 5 as illustrated. 1) Attach accessory 9 to the unit. Cutting line ⿠General Motors cars (DNX892) 1) Cut out accessory 5 to meet the shape of the opening of the center console.
Page 20 Ñ GPS antenna Ñ Microphone unit GPS antenna is installed inside of the car. It should 1) Check the installation position of the be installed as horizontally as possible to allow easy microphone (accessory =). reception of the GPS satellite signals. 2) Clean the installation surface.
Page 21 Ñ Removing the trim plate (DNX892, Ñ Removing the unit (DNX892, DNX7150BT, DNX7150BT, DNX692, DNX4150BT) DNX692, DNX4150BT) 1) Engage the catch pins on the extraction key 1) Remove the trim plate by referring to step 1 in (accessory 4) and remove the two locks on the “Removing the trim plate”.
Page 22: System Connection
REVERSE optional rear view camera. Green/Red Blue/Red To CMOS-3xx series To Relay Box. (DNX892, DNX7150BT only) (Optional Accessory) If no connections are made, Green/White camera control terminal do not let the cable come out RELAY from the tab.
Page 23 Ñ Connecting wires to terminals Fuse (10A) Fuse (10A) Ignition key switch Accessory 1 Red (Ignition wire) White/Black Yellow (Battery wire) To front left speaker Car fuse box White Car fuse (Main fuse) Black (Ground wire) ¤ (To car chassis) Gray/Black To front right speaker...
Page 24 When you connect the cable (iPod/ AV-IN(2) switchable) to HDMI/MHL terminal, remove iDatalink connector the fixture. After connecting the (DNX892/ DNX772BH/ DNX692/ DNX572BH only) cable, put the fixture again. SiriusXM Connect Vehicle Tuner connector (DNX892/ DNX772BH/ DNX692/ DNX572BH only) HDMI/ MHL connector ✎...
Page 25: About This Unit
Licensing LLC in the United States and other the Bluetooth SIG, Inc. and any use of such marks by countries. JVC KENWOOD Corporation is under license. Other • MHL and the MHL logo are a trademark or trademarks and trade names are those of their registered trademark of MHL, LLC.
Page 26 INFORMATION MAY BE OBTAINED FROM MPEG LA, SUCH DAMAGE. L.L.C. SEE HTTP://WWW.MPEGLA.COM Ñ Android connection • THIS PRODUCT IS LICENSED UNDER THE MPEG- To connect the Android device with this unit, 4 VISUAL PATENT PORTFOLIO LICENSE FOR the cable (sold separately) and the profile which THE PERSONAL AND NON-COMMERCIAL USE your Android device supports are necessary as OF A CONSUMER FOR (¡) ENCODING VIDEO IN...
Page 27 Ñ Connectable iPod/iPhone • Because Pandora® is a third-party service, the specifications are subject to change without The following models can be connected to this unit. prior notice. Accordingly, compatibility may be Made for impaired or some or all of the services may become •...
Page 28 Ñ About AUPEO! iPhone or iPod touch • Install the latest version of the AUPEO! application on your iPhone or iPod touch. (Search for “AUPEO!” in the Apple iTunes App Store to find and install the most recent version.) Android™ •...
Page 29 29 29 English ñ...
Page 30 DNX892/ DNX772BH/ DNX692/ DNX572BH: DNX892/ DNX772BH/ DNX692/ DNX572BH: Ñ FCC WARNING Ñ IC (Industry Canada) Notice This equipment may generate or use radio This device complies with Industry Canada licence- frequency energy. Changes or modifications to this exempt RSS standard(s).
Page 31: Laser Product
CALIFORNIA, USA DNX7150BT/ DNX4150BT: This product contains a CR Coin Cell Lithium Battery Ñ The marking of products using lasers which contains Perchlorate Material – special handling may apply. CLASS 1 See www.dtsc.ca.gov/hazardouswaste/perchlorate LASER PRODUCT Información acerca de la eliminación de equipos eléctricos y electrónicos al final de la vida útil The label is attached to the chassis/case and says (aplicable a los países que hayan adoptado...
Page 33 Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product.
Page 34 What Do You Want To Do? Thank you for purchasing the KENWOOD GPS NAVIGATION SYSTEM. In this manual, you will learn various convenient functions of the system. Click the icon of the media you want to play. With one-click, you can jump to the section of each media!
Page 35: Table Of Contents
ontents Before Use Radio and HD Radio™ Tuner Operation # WARNING _______________________ 4 Radio/HD Radio Tuner Basic Operation __ 58 How to Read this Manual Memory Operation __________________ 61 Basic Operations Selecting Operation _________________ 62 Functions of the Buttons Traffic Information on the Front Panel __________________ 6 (FM Tuner and HD Radio tuner only) ____ 64 Turning on the Unit _________________ 10...
Page 36: Troubleshooting
Setting Up Troubleshooting Monitor Screen Setup _______________ 92 Problems and Solutions ______________ 122 View Camera Control ________________ 93 Error Messages _____________________ 123 System Setup ______________________ 93 Resetting the Unit __________________ 125 Display Setup ______________________ 98 Appendix Navigation Setup ___________________ 101 Playable Media and Files _____________ 126 Camera Setup ______________________ 102 Status Bar Indicator Items ____________ 130...
Page 37: Before Use
• When you purchase optional accessories, • Do not use disc type accessories. check with your Kenwood dealer to make • Clean from the center of the disc and move sure that they work with your model and in outward.
Page 38: How To Read This Manual
Return to the Top page How To Read This Manual ow to Read this Manual Return to the Top page Link header CD/Audio and Visual Files/iPod/App Operation You can refer each section or top page with one-click. Search Operation Operation title You can search music, video or picture files Introduces the function.
Page 39: Basic Operations
Return to the Top page Basic Operations asic Operations unctions of the Buttons on the Front Panel DNX892/ DNX7150BT/ DNX772BH HOME NOTE • The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual panels.
Page 40 SD card slot • A slot to insert an SD card. • You can play audio/visual file in the card. * (Only for DNX892, DNX772BH) • An SD card slot for upgrading the map. For how to upgrade the map, refer to the instruction manual of the navigation system.
Page 41 Return to the Top page Basic Operations DNX692/DNX572BH/DNX4150BT R-CAM NOTE • The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual panels. • In this manual, each model name is abbreviated as follows. DNX692: DNX572BH, DNX4150BT: If above icons are showed, read the article applicable to the unit you use.
Page 42 Return to the Top page Basic Operations Number Name Motion Disc insert • A slot to insert a disc media. slot G (Eject) • Ejects the disc. • Pressing for 1 second ejects the disc forcibly. s (Reset) • If the unit or the connected unit fails to operate properly, the unit returns to factory settings when this button is pressed (P.125).
Page 43: Turning On The Unit
Return to the Top page Basic Operations urning on the Unit The method of turning on is different depending on the model. Press the <HOME> button. HOME R-CAM The unit is turned on. ● To turn off the unit: Press the <HOME> button for 1 second. If it is your first time turning the unit on after installation, it will be necessary to perform Initial setup (P.11).
Page 44: Initial Setup
Return to the Top page Basic Operations Initial setup Perform this setup when you use this unit first time or when you reset the unit (P.125). Set each item as follows. Locale Select the country for the navigation system. The language, the distance unit, and the gasoline unit are set. After setting, touch [Enter].
Page 45 Return to the Top page Basic Operations EXT SW (DNX892, DNX7150BT only) Control the external devices. 1 Touch [SET]. 2 Set device name, output pattern, and pulse set for each device. Then, touch [6]. EXT SW setup (P.96). For detailed operation, see Camera Set the parameters for the camera.
Page 46 Return to the Top page Basic Operations...
Page 47: How To Play Media
Return to the Top page Basic Operations ● To eject the disc: ow to Play Media Press the <G> button. Music CD and disc media Press the <G> button. USB device Connect the USB device with the R-CAM HOME USB cable. The panel opens.
Page 48 SD card HDMI/ MHL source You can display the screen of smartphones connected via the HDMI/MHL input terminal. DNX892/ DNX772BH Press the <HOME> button. Press the <0> button for 1 second Touch [HDMI/ MHL] in the HOME to open the front panel.
Page 49: Operating With The Home Screen
Return to the Top page Basic Operations perating with the HOME Screen Most functions can be performed from the HOME screen. Press the <HOME> button. HOME R-CAM HOME screen appears. NOTE • HOME screen can be changed by flicking left or right. ●...
Page 50 Return to the Top page Basic Operations From this screen, you can perform the following functions. Function Icon Operation Switch the audio source Touch the icon of the desired source. etc. Switch the video source Touch the icon of the desired video source.
Page 51: Common Operations
: Turn on or off the external device power Popup menu appears. EXT SW setup (P.96). supply. See (DNX892, DNX7150BT only) : Displays the SETUP Menu screen. : Displays the Audio Control Menu screen. : Displays the control screen of current source.
Page 52: List Screen
Return to the Top page Basic Operations List screen Flick scrolling There are some common function keys in the You can scroll the list screen by flicking the list screens of most sources. screen up/down or right/left. (Scroll) Scrolls the displayed text. etc.
Page 53: Navigation Operation
Return to the Top page Basic Operations Control audio from the avigation Operation navigation screen For details on the navigation function, please You can control audio sources while the refer to the Navigation Instruction Manual. navigation screen is displayed. Display the navigation screen Also, you can view the navigation information while the source control screen Press the <NAV>...
Page 54 Android smartphone in which the “KENWOOD Traffic Powered By INRIX” application is installed to this unit. Preparation • Install the latest version of the KENWOOD Traffic Powered By INRIX application on your iPhone or NOTE Android. – iPhone: Search for "KENWOOD Traffic Powered •...
Page 55: Oem Features Operation
Return to the Top page Basic Operations EM Features Operation By connecting this unit to the bus system of the vehicle using an iDataLink (commercially available), this unit can access the satellite radio source provided for the vehicle and vehicle information can be displayed on this unit.
Page 56 Return to the Top page Basic Operations : Displays information about the air : Displays information about the conditioner of the vehicle. instruments such as a speedometer. : Displays information about the tire : Displays information about the pressures of the vehicle. Parking Distance Sensor of the vehicle.
Page 57: Dvd/Video Cd (Vcd) Operation
Return to the Top page DVD/Video CD Operation VD/Video CD (VCD) Operation DVD/VCD Basic Operation Most functions can be controlled from the source control screen and playback screen. NOTE Switching the operation mode • Set the remote control mode switch to DVD mode before starting operation, see (P.119).
Page 58 Return to the Top page DVD/Video CD Operation 6 Searching area Touch to search the next/previous content. Scrolling from center of display to left or right performs fast backward or fast forward. Each time you touch each area, the speed changes; standard, 2 times, 3 times. To stop fast backward/forward, touch center of the display.
Page 59 Return to the Top page DVD/Video CD Operation Function panel Touch on the left side of the screen. The functions of each key are as follows. Repeats the current content. Each time you touch the key, repeat mode switches in the following sequence;...
Page 60: Dvd Disc Menu Operation
Return to the Top page DVD/Video CD Operation Highlight control DVD Disc Menu Operation Highlight control lets you control the DVD You can set up some items in the DVD-VIDEO menu by touching the menu key directly on disc menu. the screen.
Page 61: Zoom Control For Dvd And Vcd
Return to the Top page DVD/Video CD Operation DVD play mode setting Zoom Control For DVD And VCD You can select DVD play mode. You can enlarge Playback screen for DVD and VCD. Touch [Next] in the Menu Control screen. For VCD, touch illustrated area during playback.
Page 62 Return to the Top page DVD/Video CD Operation * This function may not be performed depending on the disc. NOTE • You cannot touch the menu keys directly on the screen when zooming.
Page 63: Dvd Setup
Return to the Top page DVD/Video CD Operation DVD Setup You can set up the DVD playback functions. NOTE • Each operation in this section can be started from Operating with the HOME screen. For details, see the HOME Screen (P.16).
Page 64: Language Setup
Return to the Top page DVD/Video CD Operation Language setup Stream Information Displays the present source information. This setting is for the language used in the The stream (Dolby Digital, Linear PCM, MPEG, menu, subtitle, and voice. You cannot setup WMA or AAC) appears.
Page 65 Return to the Top page DVD/Video CD Operation Parental level Disc setup Sets a parental level. You cannot setup this Performs setup when using disc media. item during DVD playback. Touch [SET] of [DISC SETUP]. Touch [SET] of [Parental Level]. DISC SETUP screen appears.
Page 66 Return to the Top page DVD/Video CD Operation...
Page 67: Cd/Audio And Visual Files/ Ipod/App Operation
Return to the Top page CD/Audio and Visual Files/iPod/App Operation D/Audio and Visual Files/iPod/App Operation Music/Video/Picture Basic Operation Most functions can be controlled from the source control screen and playback screen. NOTE Switching the operation • Set the remote controller mode switch to AUD mode before starting operation, see mode (P.119).
Page 68: Information Display
Return to the Top page CD/Audio and Visual Files/iPod/App Operation Music CD and disc media NOTE • In this manual, “Music CD” will be referred to as the general CDs which include music tracks in. “Disc media” will be referred to as CD/DVD disc which includes audio, picture or video files. •...
Page 69 Return to the Top page CD/Audio and Visual Files/iPod/App Operation Video screen (disc media only) 8 Searching file area (disc media only) Touch to search the next/previous file. Scrolling from center of display to left or right performs fast backward or fast forward. Each time you touch each area, the speed changes;...
Page 70 CD/Audio and Visual Files/iPod/App Operation USB device, SD card, and iPod NOTE • SD card is for DNX892, DNX772BH, DNX692, and DNX572BH only. • The screen shot below is for USB device. It may be different from the one for iPod. Control screen...
Page 71 Return to the Top page CD/Audio and Visual Files/iPod/App Operation Picture/video screen 9 Searching file area (picture/video file only) • Touch to search the next/previous file. • During slide show in USB mode, touching each area searches the next/previous music file. •...
Page 72 Return to the Top page CD/Audio and Visual Files/iPod/App Operation Function panel Touch on the left side of the screen. USB device and Music CD Disc media iPod SD card The following functions can be performed by using keys in this area. Repeats the current track/folder.
Page 73: Search Operation
Return to the Top page CD/Audio and Visual Files/iPod/App Operation Other search Search Operation When you want to narrow the list down, You can search music, video or picture files there are other search ways. by the following operations. This function is not available when music CD is the current source.
Page 74 Return to the Top page CD/Audio and Visual Files/iPod/App Operation Category search (USB device, iPod, and SD Link search (USB device, iPod, and SD card only) card only) Select whether you search by audio Touch the desired item from the left files or video files part of the screen.
Page 75 Return to the Top page CD/Audio and Visual Files/iPod/App Operation Folder search (USB device, disc media, Picture search (USB device and SD card and SD card only) only) Touch the desired folder. Touch the desired picture. Folders in the selected source are displayed The selected picture appears in full screen.
Page 76: Movie Control
Return to the Top page CD/Audio and Visual Files/iPod/App Operation Movie Control You can adjust the movie playback from a disc media. In the playback screen, touch illustrated area. Movie Control screen appears. Perform desired operation as follows. Changes subtitle language Touch [Subtitle].
Page 77: Pandora® Operation
Return to the Top page CD/Audio and Visual Files/iPod/App Operation Pandora® Operation You can listen to the Pandora® on this unit by controlling the application installed in the iPhone or Bluetooth device. To enter Pandora mode, touch [Pandora] icon in the HOME screen. NOTE •...
Page 78 Return to the Top page CD/Audio and Visual Files/iPod/App Operation Multi function menu Sub function menu The following functions can be performed by The following functions can be performed by using keys in this area. using keys in this area. Status bar in center Searches for a station.
Page 79 Return to the Top page CD/Audio and Visual Files/iPod/App Operation Station list screen Genre list screen You can perform the following functions You can perform the following functions from this screen. from this screen. The selected genre is created as a new Selects the station station.
Page 80: Iheartradio Operation
Return to the Top page CD/Audio and Visual Files/iPod/App Operation iHeartRadio Operation You can listen to the iHeartRadio on this unit by controlling the application installed in the iPhone or Android. To enter iHeartRadio mode, touch [iHeartRadio] icon in the HOME screen. NOTE •...
Page 81 Return to the Top page CD/Audio and Visual Files/iPod/App Operation Multi function menu Station search You can list and select station. Touch [ ] in the control screen. The following functions can be performed by using keys in this area. The Station Search screen appears.
Page 82 Return to the Top page CD/Audio and Visual Files/iPod/App Operation Discovery tuner My stations edit Touch [ ] in the Station Search You can set the variety level in a custom screen. station. Station Edit screen appears. Touch [ ] in the control screen. Select the station to delete from My The Discovery tuner select screen appears.
Page 83: Aupeo! Operation
Return to the Top page CD/Audio and Visual Files/iPod/App Operation AUPEO! Operation You can listen to the AUPEO! on this unit by controlling the application installed in the iPhone or Android. To enter AUPEO! mode, touch [AUPEO!] icon in the HOME screen. NOTE • Install the latest version of the AUPEO! application "AUPEO!" on your iPhone or Android. iPhone: Search for "AUPEO!"...
Page 84 Return to the Top page CD/Audio and Visual Files/iPod/App Operation Multi function menu Station search You can list and select station. Touch [ ] in the control screen. The following functions can be performed by using keys in this area. The Station Search screen appears.
Page 85: Apps Operation
Android device becomes possible. −The unit and the Android device are connected with KCA-MH100 (sold separately) and over Bluetooth profile HID and SPP. −“Kenwood Smartphone Control” is installed on the Android device. For details, see web site. http://www. kenwood.com/products/car_audio/app/kenwood_smartphone_control/eng/index.html −If you drive using an app that is prohibited from using while driving, the confirmation screen appears.
Page 86: Usb/Ipod/App/Divx Setup
CD/Audio and Visual Files/iPod/App Operation USB setup USB/iPod/App/DivX Setup You can perform setup when using USB/ Set each item as follows. iPod/ App/ DivX (DNX892/ DNX7150BT/ DNX4150BT). NOTE • Each operation in this section can be started from Operating with the HOME screen.
Page 87 Return to the Top page CD/Audio and Visual Files/iPod/App Operation DivX(R) VOD (DNX892/ iPod setup DNX7150BT/ DNX4150BT) Set each item as follows. This feature is available only for Central and South America sales area. Set each item as follows. AudioBook Speed Sets the audio book playback speed.
Page 88 Return to the Top page CD/Audio and Visual Files/iPod/App Operation iPod/iPhone connection setup HDMI + BT Select when connecting with KCA-HD100 and Press the <HOME> button. Lightning Digital AV Adapter. HOME screen appears. Bluetooth Touch [STANDBY]. Select when connecting via Bluetooth only. Press the <MENU>...
Page 89 Return to the Top page CD/Audio and Visual Files/iPod/App Operation Application link setup Select the way to connect the device with this unit. Sets the device an application is installed in and the app is selected as the source. Press the <HOME> button. HOME screen appears.
Page 90 • This setup can be set when in STANDBY source. • To enable the touch operation on this unit, install "Kenwood Smartphone Control" and start it. Search for "Kenwood Smartphone Control" in Google play to find and install the most current version.
Page 91: Radio And Hd Radio™ Tuner Operation
• Set the remote control mode switch to AUD mode before starting operation, see (P.119). • HD Radio broadcasting can be received only by the DNX892, DNX772BH, DNX692, and DNX572BH. • HD Radio broadcasting is for North American sales area only.
Page 92 Return to the Top page Radio and HD Radio Tuner Operation Function bar Tuner HD Radio tuner The functions of each key are as follows. [AM/FM] Switches the band. [A] [B] [E] [F] Function panel (P.59). Tunes in a station. The method of frequency switching can be changed. See [CHS] [CHR] (HD Radio tuner only) Selects a channel.
Page 93 Return to the Top page Radio and HD Radio Tuner Operation [RCV] (HD Radio tuner only) Switches the receive mode in the following sequence; [AUTO], [DIGITAL], [ANALOG]. For details, see Receive Mode (P.65). Bookmark (P.65). Stores the information about the song being received. See •...
Page 94: Memory Operation
Return to the Top page Radio and HD Radio Tuner Operation Manual memory Memory Operation You can store the current receiving station or Auto memory channel in memory. Select a station or channel you wish to You can store stations with good reception in store in memory.
Page 95: Selecting Operation
Return to the Top page Radio and HD Radio Tuner Operation Search by program type Selecting Operation (FM tuner and HD Radio tuner only) Preset select You can tune to a station with a specific You can list and select memorized station or program type when listening to FM.
Page 96 Return to the Top page Radio and HD Radio Tuner Operation Direct search (HD Radio tuner Category/Channel search (HD only) Radio tuner only) You can tune in by entering the desired You can specify the desired category and frequency or channel number. select a channel.
Page 97: Traffic Information (Fm Tuner And Hd Radio Tuner Only)
Return to the Top page Radio and HD Radio Tuner Operation When the traffic bulletin starts Traffic Information (FM Tuner and HD Radio tuner only) The Traffic Information screen appears automatically. You can listen and watch the traffic information automatically when a traffic bulletin starts.
Page 98: Receive Mode (Hd Radio Tuner Only)
Return to the Top page Radio and HD Radio Tuner Operation Receive Mode Bookmark (HD Radio tuner only) (HD Radio tuner only) You can set the radio broadcasts receive Stores tag information (title, artist, album, mode. URL, and description) about the song you are listening to now.
Page 99 Return to the Top page Radio and HD Radio Tuner Operation Bookmark list Displaying a list of registered bookmarks and detailed information and QR code of the song. Touch [ Deletes the bookmarks being displayed. List select screen appears. Touch [Bookmark]. The Bookmark List appears.
Page 100 Return to the Top page Radio and HD Radio Tuner Operation Bookmark delete Select the bookmark to delete from the list. Deleting a bookmark. Touch [ [All] Select all bookmarks. List select screen appears. Touch [Bookmark]. Touch [ Deletes all the selected bookmark(s) The Bookmark List appears.
Page 101: Siriusxm® Operation
Return to the Top page SiriusXM Operation iriusXM® Operation SiriusXM® Basic Operation Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment.
Page 102 Return to the Top page SiriusXM Operation 3 Multi function key Multi function menu (P.69). Touch to switch the multi function menu. For details on the menu, see 4 Preset key/Multi function menu Recalls the memorized channel. When touched for 2 seconds, it stores the current receiving channel in memory.
Page 103 Return to the Top page SiriusXM Operation [DH] Replay (P.74). Plays or pauses. See Touch for 2 seconds to register content as a Content Alert. • [ ]: Registers the artist of the current song as a Content Alert. • [ ]: Registers the current song as a Content Alert.
Page 104: Memory Operation
Return to the Top page SiriusXM Operation Memory Operation Selecting Operation Storing Channels in Preset Preset select Memory You can list and select memorized channels. You can store the current channel in memory. Selecting from the multi function menu Select the band (1-4). Each band can Touch the desired number from P1 to store up to 6 channels.
Page 105 Return to the Top page SiriusXM Operation Direct search Category/Channel search You can tune to a channel directly. You can specify the desired category and select a channel. Touch [ ] in the control screen. Touch [ ] in the control screen. Sub function menu appears.
Page 106: Content Alerts
Return to the Top page SiriusXM Operation Content Alerts SportsFlash™ When a broadcast program related to the SportsFlash™ will notify you when a big play registered artist, song or team starts, a happens during a game with one of your message appears to allow you to switch the favorite sports teams.
Page 107: Replay
Return to the Top page SiriusXM Operation Replay Touch [ ] to display an Instant Replay list. You can replay the last 60 minutes of the current channel. Touch [SiriusXM] in the HOME screen. Instant Replay List Touching this plays back the displayed program.
Page 108: Tunemix
Return to the Top page SiriusXM Operation TuneMix™ TuneScan™ TuneMix™ plays a unique blend of songs TuneScan™ is a feature that plays samples from your Preset music channels from the from the starts of multiple buffered songs current SiriusXM Preset Band, allowing you from each of the SmartFavorites channels to build a custom channel from as few as two that predominantly play music selections.
Page 109: Siriusxm Setup
Return to the Top page SiriusXM Operation Parental code SiriusXM Setup You can set a SiriusXM parental code for Parental Control. NOTE • Each operation in this section can be started from Touch [Change] of [Parental Code] in Operating with the HOME screen.
Page 110 Return to the Top page SiriusXM Operation Parental Control Touch the desired category from the list. Parental Control is a feature that provides the user with the ability to prevent unauthorized access to mature content and user selected channels. Touch [Mature], [User] or [OFF] of [Parental Control] in the SiriusXM SETUP screen.
Page 111 Return to the Top page SiriusXM Operation Skip channel select Content Alerts setup You can set the undesired channels to skip. You can turn on or off the Content Alerts function. Touch [SET] of [Skip Channel Selection]. Touch [ON] or [OFF] of [Content Alerts] Skip Category Select screen appears.
Page 112 Return to the Top page SiriusXM Operation SportsFlash™ Team Set To select a Team Get alerted when your favorite sports team You can set a team for SportsFlash. is playing on another SiriusXM channel with GameAlert™ Touch [SET] of [Sports Flash Team Set] in the SiriusXM SETUP screen.
Page 113 Return to the Top page SiriusXM Operation Select a City for Traffic & TuneStart™ Weather Touch [ON] or [OFF] of [Tune Start] in You can select a city for which you wish to the SiriusXM SETUP screen. receive SiriusXM Traffic & Weather broadcasts Turns the TuneStart on or off.
Page 114 Return to the Top page SiriusXM Operation Reset Touch [Reset] of [SiriusXM Reset] for 2 seconds in the SiriusXM SETUP screen. All SiriusXM settings return to default.
Page 115: Bluetooth Control
A2DP (Advanced Audio Distribution Profile) AVRCP (V1.4) (Audio/Video Remote Control Profile) Sound codec Bluetooth SETUP screen appears. SBC, AAC, MP3, aptX (DNX892, DNX7150BT, See the following section for each setting. DNX692 only) • Registering the Bluetooth Unit (P.83) • Connecting the Bluetooth unit (P.84)
Page 116 Return to the Top page Bluetooth Control Registering the Bluetooth Unit Select the Bluetooth unit to register from the list. Preparation • You cannot register the Bluetooth unit when you are using the following sources: iPod, Bluetooth Audio, APPS, iHeart, Pandora, AUPEO! If you want to register the Bluetooth unit while using one of the above mentioned sources, send...
Page 117 Return to the Top page Bluetooth Control Connecting the Bluetooth unit Registering from the Bluetooth unit Touch the device name you want to connect. Search the unit (“DNX****”) from your smartphone/cell-phone. Input the PIN code in your smartphone/ cell-phone. PIN code is set to “0000” as the default. SSP (Secure Simple Pairing of Bluetooth 2.1 or later) Search the unit (“DNX****”) from your...
Page 118 Return to the Top page Bluetooth Control Change the PIN code Touch [PIN Code Set]. PIN Code Set screen appears. Input the PIN code Touch [Enter].
Page 119: Playing Bluetooth Audio Device
Return to the Top page Bluetooth Control Playing Bluetooth Audio Device Bluetooth basic operation Simple Control screen List Control screen 1 Information display Displays the name of the track information. If the information is not available, device name is displayed. 2 Multi function key Touch to switch the multi function menu.
Page 120: Using Hands-Free Unit
Return to the Top page Bluetooth Control Select a dialing method. Using Hands-Free Unit You can use telephone function by connecting the Bluetooth telephone to this unit. Making a call Press the <TEL> button. See the following table for each method. HOME Select the cell-phone to use When you connect two cell-phones...
Page 121: Receiving A Call
Return to the Top page Bluetooth Control Receiving a call *1 You can sort the list to begin with touched character. Touch [ ] to answer a phone call or ] to reject an incoming call. • Characters with no corresponding name will not appear.
Page 122: Operations During A Call
Return to the Top page Bluetooth Control Phone number preset Operations during a call Adjust the receiver volume You can register frequently used phone numbers to this unit. Press the <S> or <R> button. Enter the number you want to register in Hands Free screen.
Page 123: Hands-Free Setup
Return to the Top page Bluetooth Control Voice Recognition Hands-Free Setup You can access the voice recognition function You can perform various setup about of the cell-phone connected to this unit. handsfree function. You can search the cell-phone phonebook Press the <MENU>...
Page 124 Return to the Top page Bluetooth Control Set each item as follows. Sort Order Sets how to arrange the cell-phone phonebook. First: Arranges in the order of first name. Last (Default): Arranges in the order of last name. Echo Cancel Level Adjusts the level of echo cancellation.
Page 125: Setting Up
Return to the Top page Setting Up etting Up Bright / Tint* / Color* / Contrast / Black / Monitor Screen Setup Sharpness* You can adjust image quality in iPod video, Adjusts each item. picture file, menu screen, etc. Dimmer Press the <MENU>...
Page 126: View Camera Control
• Adjust touch panel (P.95) 1 Guideline • Set up security (P.96) Touching each time turns on or off the • Set up external switch (DNX892, guideline display alternately. DNX7150BT only) (P.96) 2 Switching the View Camera • Set up memory (P.97)
Page 127 User interface Steering Remote Controller (DNX7150BT, DNX4150BT) You can setup user interface parameters. Sets the desired function in the steering remote controller. (Contact your Kenwood dealer for Touch [User Interface] in the list. details.) User Interface screen appears. DEMO Set each item as follows.
Page 128 Return to the Top page Setting Up Touch panel adjustment Language setup Touch [SET] of [Language] in the User Interface screen. Touch [Touch] in the System Menu screen. Language Setting screen appears. Touch Panel Adjustment screen appears. Set each item as follows. Follow the instruction on the screen and touch the center of each Select Mode...
Page 129: External Device Control
Security screen appears. Touch [ON] or [OFF] of [SI]. External Device Control Control the external device power supply. EXT SW setup (DNX892, Press the <MENU> button. DNX7150BT) Popup menu appears. Touch [ Set up the external switch power mode.
Page 130 Return to the Top page Setting Up Setup memory Follow the instruction on the screen. Audio Control, AV-IN SETUP, Camera, and Audio SETUP settings can be memorized. The memorized settings can be recalled at any time. For example, even when the settings are cleared due to replacement of the battery, the settings can be restored.
Page 131: Display Setup
Return to the Top page Setting Up Monitor angle control Display Setup Press the <MENU> button/ You can adjust the position of the monitor. volume knob. Popup menu appears. Touch [Angle] in the Display Menu screen. Touch [SETUP]. Angle setup screen appears. SETUP Menu screen appears.
Page 132 Return to the Top page Setting Up Panel color coordinate Registering original color You can register your original color. You can set the screen and button Touch [Adjust] in the Panel Color illumination color. Coordinate screen. The selectable items differ depending on the Panel Color RGB Coordinate screen unit.
Page 133 Return to the Top page Setting Up Changing background image display returns to the Background screen. You can load an image from the connected NOTE USB device and set it for the background • Touching [ ] rotates counter clockwise. image.
Page 134: Navigation Setup
Return to the Top page Setting Up NAV Mute Navigation Setup Mutes the volume of rear speakers during You can set navigation parameters. voice guidance of the navigation system. Default is “ON”. Press the <MENU> button/ volume knob. Popup menu appears. Touch [SETUP].
Page 135: Camera Setup
Return to the Top page Setting Up R-CAM Interruption Camera Setup Sets a method for switching the display. You can set camera parameters. Setting values are ON and OFF. ON: Switches to the rear view camera video Press the <MENU> button/ display when shifting to reverse.
Page 136: Software Information
Return to the Top page Setting Up Adjusting the parking guidelines Software Information Touch [ON] of [Parking Guidelines] in Check the software version of this unit. the Camera SETUP screen. Press the <MENU> button/ Touch [Adjust] of [Guideline Setup] in volume knob.
Page 137: Av Input Setup
Return to the Top page Setting Up AV Input Setup AV Output Interface Setup You can set AV input parameters. You can select an AV source to be output at the AV OUTPUT port. Default is “VIDEO”. Press the <MENU> button/ volume knob.
Page 138 Return to the Top page Setting Up...
Page 139: Controlling Audio
Return to the Top page Controlling Audio ontrolling Audio Setting Audio NOTE • Each operation in this section can be started from the multi function menu. Press the <MENU> button/ volume knob. You can adjust the various settings such as Popup menu appears.
Page 140 NOTE • Select “None” if you have no speakers. Touch the speaker you wish to adjust and set each item as follows. Tweeter (DNX892, DNX7150BT, DNX692 only) You can set the tweeter when you are selecting front speakers. None, Small, Middle, Large X’over...
Page 141 Adjusts the tweeter level. (When front is adjustment of sound output for each channel) to selected on Speaker Select screen) have the highest surround effects. Gain (DNX892, DNX7150BT, DNX692 only) Adjusts the front speaker, rear speaker, or subwoofer level. Phase* Sets the phase of subwoofer output.
Page 142 Return to the Top page Controlling Audio DSP select Speaker location setup In the Car Type screen, touch [Location]. You can select whether using DSP (Digital Speaker Location screen appears. Signal Processor) System. Select the speaker locations using [3]. Touch [Bypass] or [Through] of [DSP Select] in the Audio SETUP screen.
Page 143: Controlling General Audio
Return to the Top page Controlling Audio Bass Boost Controlling General Audio Sets the amount of bass boost among “OFF”/ “Level1”/ “Level2”/ “Level3”. Press the <MENU> button/ volume knob. * If you have increased the volume first, then Popup menu appears. reduced the volume using the “Volume Offset”, the sound generated if you Touch [Audio].
Page 144 • [iPod] is available only during iPod source. Sets the amounts of boost of low and high tones. Controlling equalizer manually DNX892, DNX7150BT, DNX692: This setting cannot be performed when you “OFF”, “Low”, “High” select [iPod] in the Equalizer screen.
Page 145: Zone Control
Return to the Top page Controlling Audio [S], [R] (Rear VOL.) Zone Control Adjusts the rear channel volume. You can select different sources for both [Single Zone] front and rear positions in the vehicle. Touch to turn off the dual zone function. Press the <MENU>...
Page 146: Sound Effect
See the following section for each setting. • Set Space Enhancer (DNX892, DNX7150BT, DNX692) (P.113) • Set Drive Equalizer (P.114) • Set up Raise the Sound Position (DNX892, DNX7150BT, DNX692) (P.114) • Set up Realizer or Supreme (DNX892, DNX7150BT, DNX692) (P.115)
Page 147 You can raise the sound position heard from Equalizer+]. the speakers virtually. Touch [Raise the Sound Position] in the Sound Effect screen. DNX892, DNX7150BT, DNX692: The sound quality is automatically optimized to meet the current car speed by GPS. Raise the Sound Position screen appears.
Page 148: Listening Position
Return to the Top page Controlling Audio Realizer and Supreme Listening Position (DNX892, DNX7150BT, You can adjust the sound effects according DNX692) to your listening position. You can restore the sound lost due to audio Press the <MENU> button/ compression to a realistic sound.
Page 149 Return to the Top page Controlling Audio Position DTA control NOTE • Make fine adjustment of the delay time of the You can fine-adjust your listening position. speaker output specified here to have a more suitable environment for your vehicle. In Position screen, touch [Adjust].
Page 150 Return to the Top page Controlling Audio...
Page 151: Remote Control
This unit can be operated using the remote control. For DNX7150BT, and DNX4150BT, the remote control is supplied with the unit. For DNX892, DNX772BH, DNX692, and DNX572BH the remote control is the optional accessory (KNA-RCDV331). 2CAUTION • Put the remote control in a place where it will not move during braking or other operations. A dangerous situation could result, if the remote control falls down and gets wedged under the pedals while driving.
Page 152: Functions Of The Remote Control Buttons
Return to the Top page Remote control Functions of the Remote control Buttons Switching the operation mode Direct search mode The functions operated from the remote Using the remote control, you can jump control differ depending on the position of directly to the desired file, track chapter, etc.
Page 153 Return to the Top page Remote control Location of Function Name the mode switch − Switches to the source to be played. In hands-free mode, hangs up the phone. − Switches between the navigation and the source screens. MENU Stops playing and memorizes the last point where the disc stopped.
Page 154 Return to the Top page Remote control Location of Function Name the mode switch VOICE Switches navigation display on/off. Displays the DVD menu. Turns the playback control on or off while playing VCD. Speaks the voice guidance. 10 VIEW AUD, DVD Switches the AV source to be output.
Page 155: Troubleshooting
Return to the Top page Troubleshooting roubleshooting Problems and Solutions If any trouble occurs, first check the following table for possible problems. • Some functions of this unit may be disabled by some settings made on this unit. • What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring.
Page 156: Error Messages
Mecha Error The disc player is malfunctioning. Eject the disc and try inserting it again. Contact the Kenwood dealer if this indicator continues blinking or the disc cannot be ejected. Disc Error An unplayable disc is inserted. Change the disc.
Page 157: Siriusxm
Return to the Top page Troubleshooting Error Message Cause Solution Disconnected The iPod/Bluetooth audio player Change the source to any source other than (iPod) is selected as a source although iPod/Bluetooth. Connect an iPod/Bluetooth no iPod/Bluetooth audio player is audio player, and change the source to iPod/ connected.
Page 158: Resetting The Unit
Return to the Top page Troubleshooting Problem Reason Solution Incorrect Lock The selected channel is a mature or Enter the correct lock code. Code parental lock channel, and locked by the parental lock or user lock code. Resetting the Unit If the unit or the connected unit fails to operate properly, reset the unit.
Page 159: Appendix
× Super audio CD Only CD layer can be played. *1 Incompatible with 8 cm (3 inch) discs. *2 Function of DNX892, DNX7150BT, DNX4150BT ‡ : Playback is possible. % : Playback is partly possible. × : Playback is impossible.
Page 160 *Mass-storage-class USB device, SD card only impossible. • DivX (.divx, .div, .avi) (A “DualDisc” is a disc with one surface containing DVD Function of DNX892, DNX7150BT, DNX4150BT standard signals and the other surface containing DVD only music CD signals.) • H.264/MPEG-4 AVC (.mp4, .m4v) ■...
Page 161 • When the iPod is connected to this unit, microSDHC card. “KENWOOD” or “ä” is displayed on the iPod to The MultiMedia Card (MMC) cannot be used. indicate that you cannot operate the iPod.
Page 162 Return to the Top page Appendix...
Page 163: Status Bar Indicator Items
Return to the Top page Appendix Status Bar Indicator Items Shown below is a list of indicators displayed on the status bar in the screen. Current status of this unit is displayed on the bar. Status bar T-REP ■ General The title repeat function is on.
Page 164 Return to the Top page Appendix ■ USB/SD ■ HD Radio reception FO-REP AUTO1 The folder repeat function is on. Seek mode is set to AUTO1. VIDEO AUTO2 Identifies the video file. Seek mode is set to AUTO2. MUSIC MANU Identifies the music file.
Page 165: Region Codes In The World
Return to the Top page Appendix Region Codes in the World The DVD players are given a region code according to the country or area it is marketed, as shown in the following map. ■ DVD disc marks ■ Operation regulatory marks With this DVD, some functions of this unit such as the play function may be restricted depending on the location where the DVD is playing.
Page 166: Dvd Language Codes
Return to the Top page Appendix DVD Language Codes Code Language Code Language Code Language Afar Interlingua Kirundi Abkhazian Interlingue Romanian Afrikaans Inupiak Russian Amharic Indonesian Kinyarwanda Arabic Icelandic Sanskrit Assamese Italian Sindhi Aymara Japanese Sangho Azerbaijani Javanese Serbo-Croatian Bashkir Georgian Singhalese Byelorussian...
Page 167: Specifications
Video Decoder : Linear PCM/ Dolby Digital/ MP3/ WMA/ AAC : MPEG1/ MPEG2/ MPEG4/ WMV/ H.264/ mkv Video Decoder ■ SD (DNX892, DNX772BH, DNX692, : MPEG1/ MPEG2/ DivX (DNX892/ DNX7150BT/ DNX572BH) DNX4150BT only) Wow & Flutter SD Standard : Below Measurable Limit...
Page 168 DNX772BH, DNX572BH, DNX4150BT : Line of sight approx. 10m (32.8 ft) High pass filter Audio Codec Frequency: Through, 50/ 60/ 80/ 100/ 120/ 150/ 180/ SBC/ AAC/ MP3/ aptX (DNX892, DNX7150BT, 220 Hz DNX692 only) Slope: -6/-12/-18/-24 dB/Oct. Low pass filter...
Page 169 Speaker Impedance : 15.2 dBf (1.6 μV/ 75 Ω) : 4 – 8 Ω Frequency Response (± 3.0 dB) ■ External SW (DNX892, DNX7150BT) : 30 Hz – 15 kHz Maximum Power Supply Current S/N Ratio (dB) : 500 mA : 75 dB (MONO) ■...
Page 170: About This Unit
Maximum Current Consumption the Bluetooth SIG, Inc. and any use of such marks : 10 A by JVC KENWOOD Corporation is under license. Installation Dimensions (W x H x D) Other trademarks and trade names are those of their DNX892, DNX7150BT, DNX772BH respective owners.
Page 171 Return to the Top page Appendix • Adobe, Acrobat and Reader are either registered • libFLAC trademarks or trademarks of Adobe Systems Copyright (C) 2000,2001,2002,2003,2004,2005,2006,20 Incorporated in the United States and/or other 07,2008,2009 Josh Coalson countries. Redistribution and use in source and binary forms, with or without modification, are permitted provided •...
Page 172 Return to the Top page Appendix • About Pandora®: http://help.iheartradio.com. iPhone or iPod touch • iHeartRadio® and iHeartAuto™ are trademarks • Use an Apple iPhone or iPod touch running under owned by Clear Channel Broadcasting, Inc. All uses iOS3 or later. are authorized under license.
Page 173 Return to the Top page Appendix DNX892/ DNX772BH/ DNX692/ DNX572BH: DNX892/ DNX772BH/ DNX692/ DNX572BH: ■ FCC WARNING ■ IC (Industry Canada) Notice This equipment may generate or use radio This device complies with Industry Canada licence- frequency energy. Changes or modifications to this exempt RSS standard(s).
Page 174 Return to the Top page Appendix ■ CALIFORNIA, USA DNX7150BT/ DNX4150BT: ■ The marking of products using lasers This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material – special handling CLASS 1 may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate. LASER PRODUCT ■...
Page 177 Contents Navigation End-User License Agreements Starting a Route Previewing Multiple Routes Following a Route Getting Started Using the Navigation Map Using the Navigation System Adding a Point to a Route Help When You Need It Taking a Detour Searching Help Topics Stopping the Route Status Bar Icons Using Suggested Routes...
Page 178 Using the Apps Traffic Information About the Apps Understanding Traffic About ecoRoute Traffic Data Using INRIX Traffic Service Creating a Vehicle Profile About the Traffic Icon Resetting Your Vehicle Profile Traffic on Your Route Calibrating Fuel Economy Viewing Traffic on Your Route Taking the ecoChallenge Manually Avoiding Traffic on Your Route About ecoChallenge Scores...
Page 179: Software License Agreement
Software License Agreement under copyright laws and international copyright treaties. The Garmin Products are licensed, not BY USING THE DNX892 / DNX772BH / DNX692 sold. The structure, organization and code of / DNX572BH, YOU AGREE TO BE BOUND BY THE...
Page 180 illegal or unauthorized purpose; or restrictions set forth in the following paragraphs, you may copy the applicable Garmin Product • transmit any viruses, worms, defects, Trojan only as necessary for your use to (i) view it, and horses, or any items of a destructive nature. (ii) save it, provided that you do not remove any copyright notices that appear and do not modify In the event that you are located outside of the...
Page 181 End-User License Agreements warranty exclusions, so to that extent the above display your estimated time to destination and exclusion may not apply to you. relevant traffic information regarding the predicted route. Information related to your driving routines would be accessible to any other person who uses Disclaimer of Liability.
Page 182 experience with the Content provided by a new provider may not duplicate your experience with Entire Agreement. These terms and conditions the previous Content supplier. constitute the entire agreement between Garmin and its licensors, including the licensors, service providers, channel partners, suppliers and affiliated Export Control.
Page 183 End-User License Agreements version will control. Government End Users. If End User is an agency, department, or other entity of the United States Government, or funded in whole or in part by the U.S. Government, then use, duplication, reproduction, release, modification, disclosure or transfer of the Application and accompanying documentation is subject to restrictions as set forth in DFARS 252.227-7014(a)(1) (JUN 1995) (DOD...
Page 184 English...
Page 185: Getting Started
Getting Started The first time you use your Kenwood Navigation System, you need to set up your system. The Help menu provides additional information. Help When You Need It WARNING See "Safety Precautions and Important Information" Select Apps > Help to view information in the Quick Start Guide for product warnings and about using the device.
Page 186: Satellite Signals
Adding a Shortcut Satellite Signals You can add shortcuts to the Where To? menu. A After your vehicle is turned on, the navigation shortcut can point to a location, a category, or a system begins acquiring satellite signals. The search tool. The Where To? menu can contain up to system may need a clear view of the sky to acquire 36 shortcut icons.
Page 187: Finding Locations
Finding Locations The navigation system offers many methods for finding locations. The detailed maps loaded in your navigation system contain locations, such as restaurants, hotels, and auto services. You can use categories to browse for nearby businesses and attractions. Finding a Location by Category Enter a search term.
Page 188: Finding Fuel Stations And Prices
Finding Fuel Stations and Prices Finding a City Before you can use this feature, your device Before you can find a city, you must add a must be connected using Bluetooth to access shortcut to the cities search tool (page 11).
Page 189: Finding A Location Using Coordinates
Finding Locations Finding a Location Using Coordinates Select an option: Before you can find a location using coordinates, • Select a location marker. you must add a shortcut to the coordinates • Select a point, such as a street, intersection, or search tool (page 11). address location. You can find a location using latitude and If necessary, select the location description longitude coordinates.
Page 190: Going Home
Going Home Select an area on the map. Select Where To? > Go Home. The address of the location appears at the bottom of the screen. Editing Your Home Location Information Select the location description. Select Where To? > Saved > Home. Select Set Location. Select > > Edit. Saving a Location Enter your changes.
Page 191: Starting A Route To A Saved Location
Finding Locations Starting a Route to a Saved Location Assigning Categories to a Saved Location You can add custom categories to organize your Select Where To? > Saved. saved locations. ⁄ If necessary, select a category, or select All Saved Places. •...
Page 192: Navigation
• To add or remove map layers, select safe driving judgment at all times. Garmin and JVC KENWOOD will not be responsible for any traffic • To view specific location categories, select fines or citations you receive for failing to follow all and select a category icon.
Page 193: Adding A Point To A Route
Navigation Adding a Point to a Route Using Suggested Routes Before you can use this feature, you must save at While navigating a route, select least one location and enable the travel history return to the main menu. feature (page 15).
Page 194: Navigating To An Exit
Navigating to an Exit Adding a Custom Avoidance Area Custom avoidances allow you to avoid specific From the map, select > Exit Services > areas and sections of road. You can enable and disable custom avoidances as needed. Select Go!. Select Settings >...
Page 195: Deleting Custom Avoidances
Navigation Deleting Custom Avoidances Select Settings > Navigation > Custom Avoidances. Select an option: • To delete all custom avoidances, select • To delete one custom avoidance, select the avoidance, and select > Delete. Enabling Advanced Detours Select Settings > Navigation > Advanced Detours. Taking a Detour Around Specified Areas You can take a detour for a specified distance along your route or detour around specific roads.
Page 196: The Map Pages
The Map Pages You can customize which data appear on the map and view upcoming turns and current location information. Customizing the Map Layers Changing the Map Perspective You can customize which data appear on the Select Settings > Map & Vehicle > Driving map, such as icons for points of interest and road Map View.
Page 197: Viewing A List Of Turns
The Map Pages Viewing a List of Turns Viewing Junctions When you are navigating a route, you can view all While navigating a route, you can view the of the turns and maneuvers for your entire route junctions on major roadways. When you approach and the distance between turns.
Page 198: Resetting Trip Information
Resetting Trip Information From the map, select > Trip Computer. Select > Reset All. Select an option: • When not navigating a route, select Select All to reset every data field, except the speedometer, on the page. • Select Reset Trip Data to reset the information on the trip computer. • Select Reset Max. Speed to reset the maximum speed. • Select Reset Trip B to reset the odometer. Viewing Current Location Information You can use the Where Am I? page to view information about your current location.
Page 199: Using The Apps
Traffic Camera, and more. The coverage of these services depends on availability in your region. Enter the current fuel price. For details, see other Kenwood system manuals. Enter how much fuel your vehicle has used About ecoRoute since the last fill up.
Page 200 Resetting Your Score Exporting a Mileage Report You can restart your current ecoChallenge. Select Apps > ecoRoute™ > ecoChallenge. Connect a USB mass storage device to your Kenwood unit. Select > Reset. Select Apps > ecoRoute™ > Mileage Report. Select Yes.
Page 201 Using the Apps Viewing Weather Near a Different City Planning a Trip You can use the trip planner to create and save a Select Apps > Weather > Current Location. trip with multiple destinations. Select an option: Select Apps > Trip Planner. • To view weather for a favorite city, select a city Select New Trip.
Page 202 Editing a Saved Trip Finding Parking Before you can use this feature, your device Select Apps > Trip Planner. must be connected using Bluetooth to access connected services. This feature is not available Select a saved trip. in all areas. You can find detailed parking information, Select including parking availability in nearby garages,...
Page 203 Traffic Data Using INRIX Traffic Service NOTICE Garmin and JVC KENWOOD is not responsible for You can purchase a traffic subscription to receive the accuracy or timeliness of the traffic information. traffic data using INRIX Traffic Service. When your...
Page 204 Traffic on Your Route Viewing Traffic on the Map When calculating your route, the navigation The traffic map shows color-coded traffic flow system examines the current traffic and and delays on nearby roads. automatically optimizes the route for the shortest From the map, select time.
Page 205: Customizing The Settings
Customizing the Settings You can customize the settings of your GPS navigation system. Customizing the Navigation System Changing the Navigation Settings Select Settings. Select Settings > Navigation. • Calculation Mode—sets route preference. Select a setting category. • Avoidances—sets road features to avoid on a route. •...
Page 206 Customizing the Settings Updating the Time Settings Restoring Settings You can restore a category of settings or all Select Settings > Units & Time. settings to the factory default values. • Current Time—select Automatic to update the time Select Settings. automatically.
Page 207 Follow the on-screen instructions. WARNING Updating the Map Data Garmin and JVC KENWOOD are not responsible for You can purchase updated map data from Garmin the consequences of using custom POI databases, or ask your Kenwood dealer or Kenwood service or for the accuracy of custom POI databases.
Page 208 For the latest free software updates (excluding map data) throughout the life of your Garmin products, visit the Garmin Web site at www.garmin.com/kenwood. © 2015 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, USA Garmin (Europe) Ltd.

This manual is also suitable for:

Dnx7150bt Dnx772bh Dnx572bh Dnx4150bt Dnx692

Kenwood DNX892 Quick Start Manual

Table of Contents

Before Use

How to Read this Manual

Basic Operations

DVD/Video CD (VCD) Operation

CD/Audio and Visual Files/ Ipod/App Operation

Radio and HD Radio™ Tuner Operation

Siriusxm® Operation

Bluetooth Control

Setting up

Controlling Audio

Remote Control

Troubleshooting

Appendix

Gps Navigation System

End-User License Agreements

Getting Started

Finding Locations

Navigation

The Map Pages

Quick Links

Quick Start Guide

Chapters

Troubleshooting

Related Manuals for Kenwood DNX892

Summary of Contents for Kenwood DNX892

This manual is also suitable for:

Table of Contents