Setting Up The Hands-Free Phone - Kenwood DNX6960 Instruction Manual

[SMS Receive Beep] Sets the beep of the
incoming SMS.
(~
"ON")
"ON": Beep is heard.
"OFF": Beep is canceled.
[Phone Information Use] Sets whether to
use cell-phone phonebook, outgoing calls list.
incoming calls list and missed calls list.
(~"ON")
"ON": Yes.
"OFF": No.
[SMS Use] Sets the SMS function.
([2]
"ON")
"ON": Use SMS function.
"OFF": SMS not available.
[Key Word] Registers the voice to select phone
number category with voice recognition.
See <Key Word Voice Registration> (page 55).
[Use Phone Voice Recognition]
Sets whether to dial using the phone voice
recognition function.
([2]
"ON")
[Echo Cancel Level]* Adjusts the level of echo
cancelling function.
(I~
"15")
[Microphone Level]* Adjusts the sensitivity of
the microphone for a telephone call. (~ "8")
[Noise Reduction Level]* Adjusts the level
of the noise reduction and the quality of the
resulting speech signal. (~ "4")
[Restore]* Restores the [Echo Cancel Level],
[Microphone Level], or [Noise Reduction Level]
value to the initial value.
Either the time interval for automatic answer set on this
unit or the time interval set on the cell-phone, whichever
is shorter, takes effect.
• "The items with asterisk (") are not appeared on the
following models:
DNX5160 and DDX516
~
~
I
I
!
[Auto Response] Sets an automatic response
time to pick-up an incoming call.
([2]
DNX69601 DNX61601 DNX6020EXI
DNX6460BTI DDX6161 DDX6046BT: "OFF"
DNX51601 DDX516 :
"8")
"OFF": This function is disabled.
"0-99": Sets the incoming call ringing duration
(in seconds).
[Call Beep] Sets the beep of the incoming call.
([~"ON")
"ON": Beep is heard.
"OFF": Beep is canceled.
Setting Up the Hands-Free Phone
The Hands-Free system can be set as follows.
D
Display the Hands-Free Control screen
See <Making a call> (page 49).
D
Display the Hands Free Setup screen
I •
I
D
Set each item
I . -.. .
I
j
DDX SERIES
DDX616/DDX6046BT/DDX516 English 53