Av Input Setup; Av Output Interface Setup - Kenwood DNN9350BT Instruction Manual

AV Input Setup

You can set AV input parameters.
1
Touch [ ] on any screen.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [Source].
4
Touch [AV-IN SETUP] in the list.
AV-IN SETUP screen appears.
5
Set each item as follows.
AV-IN1 Name / AV-IN2 Name
Set a name to be displayed when you select
a system that is connected via the AV INPUT
port. Default is "VIDEO".

AV Output Interface Setup

You can select an AV source to be output at
the AV OUTPUT port. Default is "VIDEO1".
1
Touch [ ] on any screen.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [AV-OUT].
AV-OUT Interface screen appears.
4
Touch [C] or [D] to set [AV-OUT] to
VIDEO, DISC, iPod, or OFF.
NOTE
• You can select "iPod" only when iPod is connected
to this unit with KCA-iP202. For the connection
iPod/iPhone connection setup
setting, refer to
(P.78).
Return to the Top page
Setting Up
119