Kenwood DNX6960 Instruction Manual page 6

Notes
About Picture files
• Acceptable picture files
JPEG
• Extensions
jpg, jpeg
• Acceptable media
CD-R/RW/ROM, DVD±R/RW, mass-storage-class
USB device
Acceptable discs, disc formats, USB device file system,
file and folder names and playing order are the same
as those for audio files. See <About Audio files>.
iPod/iPhone that can be connected to this
unit
Made for
· iPod nanG (1 st generation) . iPod nano (2nd generation)
· iPod nanG (3rd generation) . iPod nanG (4th generation)
· iPod nanG (5th generation)
· iPod with video . iPod classic
· iPod touch (l st generation) . iPod touch (2nd generation)
Works with
iPhone iPhone 3G iPhone 3GS
4GB 8GB 16GB 8GB 16GB 16GB 32GB
• Update iPod/iPhone software to the latest version.
• You can control an iPod/iPhone from this unit by
connecting an iPod/iPhone (commercial product)
with Dock connector using an optional accessory
iPod connection cable (KCA-iP30lV). The word
"iPod" appearing in this manual indicates the iPodl
iPhone connected with the KCA-iP30lV (optional
accessory).
• By connecting your iPod/iPhone to this unit with
an optional accessory iPod connection cable (KCA-
iP301 V), you can supply power to your iPod/iPhone
as well as charge it while playing music However,
the power of this unit must be on.
(.:'l...
~
• If you start playback after connecting the iPod, the
music that has been played by the iPod is played
first
In this case, "RESUMING" is displayed without
displaying a folder name, etc Changing the browse
item will display a correct title, etc
• When the iPod is connected to this unit.
"KENWOOD" or ",/" is displayed on the iPod to
indicate that you cannot operate the iPod.
About USB device
• In this manual, the word "USB device" is used for
flash memories and digital audio players which
have
USB terminals.
• When the USB device is connected to this unit,
it can be charged up provided that this unit is
powered.
Install the USB
device
in the place where it will not
prevent you from driving your vehicle properly.
• You cannot connect a USB device
via
a USB hub
and Multi Card Reader
• Take backups of the audio files used with this unit
The files can be erased depending on the operating
conditions of the USB device.
We shall
have
no compensation for any damage
arising out of erasure of the stored data.
• No USB device comes with this unit You need to
purchase a commercially available USB device.
• When connecting the USB device, usage of the
CA-U 1EX (option) is recommended.
Normal playback is not guaranteed when a cable
other than the USB compatible cable is used.
Connecting a cable whose total length is longer
than
5
m can result in abnormal playback.
Navigation units that can be connected to
this unit (DDX series only)
· KNA-G610 • KNA-G630
Update the navigation software to the latest
version. For how to update the software, refer to the
instruction manual of the navigation unit
For the latest information on connectable navigation
units, access
www.kenwood.com/cs/cel.
About Satellite Radio tuner
This unit supports Satellite Radio tuners which are
released by SIRIUS and XM.
Optional accessories below are necessary for
connection.
SIRIUS tuner: Conversion cable CA-SR20V
XM tuner: XM interface Box KCA-XM 1OOV
Refer to the instruction manual of Satellite radio
tuner.
HD Radio™ that can be connected to this
unit
• KTC-HR300 . KTC-HR200
When you connect an HD Radio, Tuner features of
the unit are disabled and changed to HD Radio tuner
features.
Bluetooth unit that can be connected to
this unit (DNX5160/DDX516)
• KCA-BT200
6 DNX SERIES DNX6960/DNX6160/DNX6020EX/DNX6460BT/DNX5160