Av Input Setup; Av Output Interface Setup - Kenwood DNX892 Instruction Manual

Return to the Top page
Setting Up

AV Input Setup

You can set AV input parameters.
1
Press the
volume knob.
Popup menu appears.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [Source].
4
Touch [AV-IN SETUP] in the list.
AV-IN SETUP screen appears.
5
Set each item as follows.
AV-IN Name/
AV-IN2 Name (DNX7150BT, DNX4150BT)
Sets a name to be displayed when you select
a system that is connected via the AV INPUT
port. Default is "VIDEO".
104 104
<MENU> button/

AV Output Interface Setup

You can select an AV source to be output at
the AV OUTPUT port. Default is "VIDEO".
1
Press the
volume knob.
Popup menu appears.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [AV-OUT].
AV-OUT Interface screen appears.
4
Touch [2] or [3] to set [AV-OUT] to
VIDEO(1), DISC, iPod, USB, or OFF.
NOTE
• Only when you select "USB+AV-IN" in iPod
Connection Setup, "USB" can be selected as AV
output source. For the connection setting, refer to
iPod/iPhone connection setup
<MENU> button/
(P.55).