Advertisement
Turning the system On and Off
Before connecting the Panel Mount PC to power, connect any peripheral devices. As a general
rule, any peripheral device should only be connected or disconnected when the Panel Mount PC
is off with the exception of any USB or 1394 peripheral.
The Panel Mount PC may be turned on using the main On-Off switch which controls the power
outlet to which the unit is plugged in. Once the Panel Mount PC is turned on, the computer
power reset switch must be depressed for Windows to start. Windows must be properly shut
down before the main power switch is turned off to prevent the chance of corrupting files in the
operating system.
The Panel Mount PC is rated for continuous duty. However, to extend the life of the various
components and conserve power, it is highly recommended that the system be properly shut
down and power turned off when the Panel Mount PC is not in use.
LCD Monitor Warm-up Time
All LCD monitors need time to become thermally stable the first time you turn them on.
Therefore, to achieve more accurate adjustments for parameters, allow the LCD monitor to
warm (be on) for at least 20 minutes before making any screen adjustments.
Maintenance
The Panel Mount PC is designed to provide optimum service and performance with minimal
maintenance including the occasional external cleaning. For cleaning the Panel Mount PC
enclosure follow the suggested guidelines.
General – NEVER use abrasive cleaners or solvent-based cleaners. Use a clean soft cloth. The
Panel Mount PC should only be opened and serviced by a qualified technician. Keep the area
around the Panel Mount PC clear and free of excessive dirt or other contaminants. Do not use
water or any liquids on the Panel Mount PC.
10.4" C1-D2 Compliant Panel Mount PC
For Additional Assistance
Contact Your VarTech Sales Representative
Vartech Systems, Inc.
11529 Sun Belt Ct.
Baton Rouge, LA 70809
800-223-8050
Fax: 225-297-2440
www.vartechsystems.com
12
486-0029-00-00
Advertisement
