Advertisement
PLEASE NOTE – ANY EQUIPMENT OR ASSOCIATED CABLING CONNECTED TO THIS
DEVICE MUST BE NON-INCENDIVE AND/OR SUITABLE FOR THE CLASS I DIVISION 2
AREA IN WHICH IT IS TO BE INSTALLED.
Power Connection (Power In)
AC models - The AC model of the Panel Mount PC includes an AC line cord which is 3ft long
with stripped wires at the connection end. The user must supply a lockable industrial-type power
supply plug to mate with their power outlet. Also, the end user must either supply a switch to
their power outlet suitable for Class I, Division 2 use (if adjacent to the power outlet), or locate
the said switch outside the hazardous area.
DC models - The Panel Mount PC has a lockable DC plug and socket supplied to which the
user's DC source must be connected. If the DC source (power brick or otherwise) is plugged
into an AC socket within the hazardous area, the end user must supply a lockable industrial-type
power supply plug to their power outlet. Also, the end user must either supply a switch to their
power outlet suitable for Class I, Division 2 use (if adjacent to the power outlet), or locate the
said switch outside the hazardous area.
Serial Connections (COM1-2)
The Panel Mount PC is supplied with three serial connectors. COM1 is configured for RS-232;
two COM2 ports are provided, one configured as RS-232 and one as RS422/485 (see
illustration, above.) The connectors are 9 pin female connectors and can be set up for any baud
rate from 300 to 19.2 baud. The connector is located on the bottom panel of the system.
Ethernet Connections (LAN)
The Panel Mount PC is supplied with one integrated Ethernet connector. The interface will
support 10/100/1000 BaseT connection to a local area network (LAN). The Panel Mount PC is
supplied with two RJ-45 female connectors located on the bottom panel of the system.
USB Connections (USB1-4)
The Panel Mount PC is supplied with four USB 2.0 connectors located on the bottom front panel
of the system.
VGA Port
The 15-pin female VGA connector can be used to connect to any analog VGA monitor.
10.4" C1-D2 Compliant Panel Mount PC
11
486-0029-00-00
Advertisement
