Combo Interface; Leds; System Status Led - HP 3600 v2 Series Installation Manual

Combo interface

A combo interface has one fiber SFP port and one 1000Base-T copper Ethernet port. These two ports
share one port number and cannot work simultaneously. When you activate one port, the other port
automatically shuts down.
On the front panel of an 3600 v2 switch, the copper combo ports are marked in the port number + T
format, and the fiber SFP combo ports are marked in the port number + S format.
3600-48 v2 SI Switch front panel as an example.
Figure 42 Identify the combo ports on the 3600-48 v2 SI Switch front panel

LEDs

Table 13 LEDs at a glance
LED

System status LED

DC power LED
Port mode LED
Seven-segment LED
10/100Base-TX Ethernet port LED
1000Base-T Ethernet port LED
100Base-X SFP port LED
1000Base-X SFP port LED
System status LED
The system status LED shows the operating status of the switch.
Availability
Entire series
PoE-capable 3600 v2 SI switches (model suffix PWR-SI), 3600
v2 EI switches
Entire series
Entire series
Entire series
Entire series
3600-24-SFP v2 EI Switch
Entire series
48
Figure 42 uses the