Section 3 - Buttons & Indicators; Buttons&Indicators - Keurig K-Cup K10 MINI Plus Owner's Manual

SeCtIon 3
Power Button
Press to turn the brewer power on and off.
add Water Indicator
Flashing Blue
with cold water until it reaches just under the rim
of the desired level — 6, 8, or 10 oz. of the Water
Level Guide.
handle Indicator
Flashing Blue
minimum water amount of 6 oz. has been poured
into the Cold Water Reservoir. After adding your
desired amount of water (10 oz. maximum),
lower the Cold Water Reservoir Lid. The light will
continue to flash until you lift the Handle.
Brew Button
Flashing Blue – Indicates you are ready to brew.
Press the BREW Button.
Flashing Red – Indicates water is heating
(approximately 2 minutes).
Solid Red – Indicates brewing and dispensing of
beverage has begun.
Buttons & Indicators
(does not illuminate)
– Fill the Cold Water Reservoir
– The blue light flashes when the
Your next Brew
When the brewing process is complete, the Add Water
Indicator light will appear. At this point you can begin
making the next beverage, or you can power off.
automatic Shut-off
As a safety feature, your brewer will automatically
shut off at any stage when it is idle for longer than 90
seconds. Press the Power Button to restart. If it shut
off while the BREW Button was flashing blue, lift and
lower the Handle to reset.
Drip Tray overfill Indicator
A red float will appear when the Drip Tray is almost
full. Carefully slide Drip Tray out and empty contents
into the sink.
7