SeCtIon 3
Power Button
BREW
BREW
BREW
The Power Button turns your Brewer On and Off.
add Water Indicator
— Indicates you should fill the
Flashing Blue
Cold Water Reservoir.
BREW
BREW
Brewer Handle Indicator
Flashing Blue
— Indicates the minimum amount
of water (6 oz.) has been poured into the Cold
Water Reservoir and you're ready to insert a
K-Cup. Lift the Brewer Handle, insert a K-Cup,
then lower the Brewer Handle completely and
firmly to close.
Buttons & Indicators
BREW
BREW
BREW Button Indicators
BREW
Flashing Blue
your beverage. Press the BREW Button once to
start the brewing process.
Flashing Red
Solid Red
Drip Tray Overfill Indicator
A red float will appear when the Drip Tray is
almost full. Carefully slide the Drip Tray out and
empty its contents.
Your next Brew
When the brewing process is complete, your
Brewer is ready for the next beverage. Begin
the process again, adding fresh water and a
new K-Cup.
Your Brewer will shut off automatically
when it is idle for longer than 90 seconds.
Simply press the Power Button to restart.
7
— Indicates you are ready to brew
— Indicates the water is heating.
— Indicates brewing has begun.