Table of Contents
Advertisement
Menu : 2
Adjustment Item
Auto Set-up *
Direct
NOTE
The brightness of screen varies for several seconds during the adjustment.
This function is not performed automatically when changing the signal input because
the factory-preset of "Setting" in Auto Set-up is set to Off.
Color Temp.
NOTE
sRGB is an international standard which defines and unifies the difference of color
appearance between equipment.
You can not adjust the Gamma and Economy Mode during sRGB mode because those
settings are locked.
is displayed while sRGB is active.
Sharpness
*
For best results, use the Auto Set-up in conjunction with the adjustment pattern. See page 15 for
3
SCREEN ADJUSTMENTS.
Direct
You can skip the Menu pages and display an adjustment scale directly by using the following button
operations.
Auto Set-up: Press the Auto Button when the Menu is not displayed.
12
OPERATING THE MONITOR
1024 × 768
H: 60.0 KHz V: 75.0 Hz
Problem / Option
NO
Return to Menu.
3
Adjust Clock, Phase, V-Position and H-Position
YES
automatically.
Setting
Off
On
1
Color 1: 9300K
2
Color 2: 7500K
Color 3: 6500K
3
s
sRGB
(User)
1 2 3 4 5
Adjust the picture quality at resolutions of less than 1024 × 768.
You can change the picture quality from 1 to 5 (sharp to soft).
Press the + Button to change the picture quality in numerical
order. Press the – Button to change the picture quality in reverse
numerical order.
Menu:2
The Auto Set-up is not performed when the
signal input is changed.
Adjust Clock, Phase, V-Position and H-Position
automatically when the signal input is changed.
R
Too weak
G
Too strong
B
Button to Press
Advertisement
Table of Contents
